charles zhuang wrote:
Hi,
I got the Asus wimax usb dongle, model: WUSB25E2V2. However, after I
“load.sh” to load all the drivers, and plug in the usb dongle, the
driver has enumerate as a mass storage device instead a eth device.
Following is the log showing this:
Nov 19 11:23:18 cz kernel: [ 884.431101] usbcore: registered new
interface driver i2400m_usb
Nov 19 11:23:32 cz kernel: [ 885.519216] usb 7-2: new high speed USB
device using ehci_hcd and address 8
Nov 19 11:23:32 cz kernel: [ 885.534565] usb 7-2: configuration #1
chosen from 1 choice
Nov 19 11:23:32 cz kernel: [ 885.534972] hub 7-2:1.0: USB hub found
Nov 19 11:23:32 cz kernel: [ 885.535375] hub 7-2:1.0: 4 ports detected
Nov 19 11:23:33 cz kernel: [ 885.980035] usb 7-2.2: new high speed USB
device using ehci_hcd and address 10
Nov 19 11:23:33 cz kernel: [ 886.004088] usb 7-2.2: configuration #1
chosen from 1 choice
Nov 19 11:23:33 cz kernel: [ 886.004453] scsi7 : SCSI emulation for
USB Mass Storage devices
Nov 19 11:23:33 cz kernel: [ 886.204623] usb 7-2.4: new high speed USB
device using ehci_hcd and address 11
Nov 19 11:23:33 cz kernel: [ 886.223027] usb 7-2.4: configuration #1
chosen from 1 choice
Nov 19 11:23:33 cz kernel: [ 886.246995] input: i2400m-usb:7-2.4:1.0
as /devices/virtual/input/input15
Nov 19 11:23:35 cz kernel: [ 887.100291] i2400m_usb 7-2.4:1.0:
firmware interface version 9.1.1
Nov 19 11:23:38 cz kernel: [ 887.260006] scsi 7:0:0:0: CD-ROM ASUS
WiMAX CD-ROM 2.00 PQ: 0 ANSI: 0 CCS
Nov 19 11:23:38 cz kernel: [ 887.287654] sr3: scsi3-mmc drive: 0x/0x caddy
Nov 19 11:23:38 cz kernel: [ 887.287824] sr 7:0:0:0: Attached scsi
generic sg2 type 5
Did you try rmmod usb-storage and see if it works?
If so then udev rules can most likely be written to work around the issue.
Please let us know.
_______________________________________________
wimax mailing list
[email protected]
http://www.linuxwimax.org/mailman/listinfo/wimax
