I have tried it. I can get out of the mass storage mode, but I don't know how to make the dongle go back into the normal mode. My Asus contact told me that they have some new software and firmware that can do better, but their engineering team is really slow to address my question. Any way, Beceem and Motorola software and hardware can address my need, so I gave up on Intel/Asus.
Charles -----Original Message----- From: Inaky Perez-Gonzalez [mailto:[email protected]] Sent: Tuesday, January 06, 2009 1:01 PM To: [email protected] Cc: charles zhuang; 'Nicolas GIRARD'; 'Andrew Zabolotny' Subject: Re: WiMAX driver crash on load On Tuesday 06 January 2009, charles zhuang wrote: > I bought from Asus. I intend to use it on a linux device, but found out > this model, WUSB25E2V2, is only for windows. The open source linux code > can't be used directly on this dongle. Talking without having seen it, it should work if we can get the dongle to exit the mass storage mode and enter the normal mode. We'd need asus to explain how to do that, or someone should try the suggestions Dan Williams made of using an SCSI eject command on it. -- Inaky _______________________________________________ wimax mailing list [email protected] http://www.linuxwimax.org/mailman/listinfo/wimax
