I'm having trouble getting wimaxd to run.
I installed kernel 2.6.29-rc2 and the i2400m firmware, and the card is detected
properly, and the wmx0 interface is visible.
I then compiled and installed the latest wimax tools, wimax network service,
and supplicant, but wimaxd will not start. I edited /etc/wimax/config.xml and
set Severities to 255 so I could see all of the debugging messages. Here's the
output in /var/log/wimax/wimaxd1.log:
16:05:42 @Notice @-137135936 @ALL @new tarce
================================================ [Trace_Init]
@TraceAgent.c (404) @wimaxd
16:05:42 @Notice @-137135936 @ALL @new trace wimaxd Trace file
opened at 16:05:42 [Trace_Init]
@TraceAgent.c (409) @wimaxd
16:05:42 @Notice @-137135936 @ALL @new tarce
================================================ [Trace_Init]
@TraceAgent.c (411) @wimaxd
16:05:42 @Info @-137135936 @ACT @pipe services are initialized
[Act_Initialize]
@Act.c (980) @wimaxd
16:05:42 @Info @-137139312 @Messenger @Indication Consumer Thread
started. [MessageConsumerThreadFunc]
@Messenger.c (296) @wimaxd
16:05:42 @All @-137135936 @KDAPI_ADAPTER @Target: Driver
[KDAPI_ADAPTER_Init]
@KDapiAdapter.c (244) @wimaxd
16:05:42 @Info @-153924720 @CONFIGURATION @config param DeviceResetRetries
= 5 , source=Registry [DriverMonitor_Connect]
@DriverMonitor.c (264) @wimaxd
16:05:42 @All @-137135936 @ACT @Watchdog disabled
[DriverMonitor_Init]
@DriverMonitor.c (439) @wimaxd
16:05:42 @Info @-137135936 @ACT @Act_InitPipe succeeded
[Act_Initialize]
@Act.c (993) @wimaxd
16:05:42 @All @-137135936 @SERVICE @[PipeHandler][4.0.0.6.0]
[ValidateVersion]
@VersionUtils.c (95) @wimaxd
16:05:42 @Info @-137135936 @ACT @Act_InitializeInternalResources
- succeeded. waiting for driver.. [Act_Initialize]
@Act.c (1031) @wimaxd
16:05:42 @Notice @-162317424 @ACT @Act_MessagesHandlingThreadFunc
started [Act_MessagesHandlingThreadFunc]
@Act.c (677) @wimaxd
16:05:42 @Info @-137135936 @KDAPI_ADAPTER @trying to reset the connection
to the driver [DriverMonitor_ResetDriverConnection]
@DriverMonitor.c (541) @wimaxd
16:05:42 @Info @-137135936 @ACT @Act_Initialize (OUT) -
succeeded!! [Act_Initialize]
@Act.c (1039) @wimaxd
16:05:43 @Debug @-153924720 @KDAPI_ADAPTER @Getting system state. try=0 of
of 5 [DriverMonitor_Connect]
@DriverMonitor.c (314) @wimaxd
16:05:43 @Info @-153924720 @KDAPI_ADAPTER @Sending GetSystemState query
[DriverMonitor_InitSystemState]
@DriverMonitor.c (170) @wimaxd
16:05:43 @Info @-153924720 @KDAPI_ADAPTER @SystemState updated = 15
[DriverMonitor_InitSystemState]
@DriverMonitor.c (229) @wimaxd
16:05:44 @Notice @-153924720 @ACT @Act_MessagesHandler(IN).
pdwResponseMessageID=-153926796 [Act_MessagesHandler]
@Act.c (491) @wimaxd
16:05:44 @Notice @-153924720 @ACT @Act_MessagesHandler(IN).
dwSentMessageID=3003 [Act_MessagesHandler]
@Act.c (497) @wimaxd
16:05:44 @All @-162317424 @ACT @Driver is up!!! [Act_DriverUp]
@Act.c (593) @wimaxd
16:05:44 @Info @-162317424 @ACT @starting ndis [Act_DriverUp]
@Act.c (599) @wimaxd
16:05:44 @Info @-162317424 @SERVICE @Sending L4
command=L4_L3_OPCODE_GET_STATE [wmx_SendL4Command]
@WrappersUtils.c
(216) @wimaxd
16:05:44 @Info @-162317424 @SERVICE @returned status from driver
after wmxGetStatusStr function is WMX_ST_OK [wmx_SendL4Command]
@WrappersUtils.c (281) @wimaxd
16:05:44 @Info @-162317424 @ACT @in Act_SetDeviceLEDParam
function state is 15 [Act_SetDeviceConfigParam]
@Act.c (331) @wimaxd
16:05:44 @Info @-162317424 @SERVICE @Sending L4
command=L4_L3_OPCODE_GET_STATE [wmx_SendL4Command]
@WrappersUtils.c
(216) @wimaxd
16:05:44 @Info @-162317424 @SERVICE @returned status from driver
after wmxGetStatusStr function is WMX_ST_OK [wmx_SendL4Command]
@WrappersUtils.c (281) @wimaxd
16:05:45 @Info @-162317424 @ACT @Trying to set the operation
mode. system state=15 [Act_SetOperationMode]
@Act.c (413) @wimaxd
16:05:45 @Info @-162317424 @ACT @starting supplicant
[Act_InitPipeLogic]
@Act.c (237)
@wimaxd
16:05:45 @Info @-162317424 @supplicant_ag...@initsupplicantlibrary (IN)
[InitSupplicantLibrary]
@SupplicantAgent.c(259) @wimaxd
16:05:45 @Notice @-162317424 @supplicant_ag...@tls source - External
[InitSupplicantLibrary]
@SupplicantAgent.c(319) @wimaxd
16:05:45 @Info @-162317424 @supplicant_ag...@using external TLS
implementation [InitSupplicantLibrary]
@SupplicantAgent.c(332)
@wimaxd
16:05:45 @Info @-162317424 @supplicant_ag...@initsupplicantlibrary (OUT)
[InitSupplicantLibrary]
@SupplicantAgent.c(345) @wimaxd
16:05:45 @Notice @-162317424 @supplicant_ag...@supplicantagent_initialize
Succeeded. Target ID=4 [SupplicantAgent_Initialize]
@SupplicantAgent.c(1346) @wimaxd
16:05:45 @Info @-162317424 @ACT @starting ndns
[Act_InitPipeLogic]
@Act.c (245)
@wimaxd
16:05:45 @Error @-162317424 @ACT @starting ndns failed
[Act_InitPipeLogic]
@Act.c (248)
@wimaxd
16:05:45 @Error @-162317424 @ACT @configuration problem
[Act_DriverUp]
@Act.c (630)
@wimaxd
16:05:45 @Info @-162317424 @ACT @exiting... [Act_Exit]
@Act.c (192) @wimaxd
16:05:45 @Notice @-196359280 @ACT @Act_Shutdown(IN) [Act_Shutdown]
@Act.c (857) @wimaxd
16:05:45 @Notice @-196359280 @ACT @Act_Shutdown() -
Act_FreeInternalResources [Act_Shutdown]
@Act.c (863)
@wimaxd
16:05:45 @Notice @-196359280 @ACT @Act_Shutdown() -
DriverMonitor_Stop [Act_Shutdown]
@Act.c (884)
@wimaxd
16:05:45 @Notice @-196359280 @ACT @Act_Shutdown() -
l5_sockets_dispatcher_Stop [Act_Shutdown]
@Act.c (887)
@wimaxd
16:05:45 @Notice @-196359280 @ACT @Act_Shutdown() -
PIPE_HANDLER_Stop [Act_Shutdown]
@Act.c (890)
@wimaxd
16:05:45 @Info @-137139312 @Messenger @Stop Event Signaled - Thread
Aborting! [MessageConsumerThreadFunc]
@Messenger.c (304) @wimaxd
16:05:45 @Notice @-196359280 @ACT @Act_Shutdown() -
Act_FiniPipeLogic [Act_Shutdown]
@Act.c (899)
@wimaxd
16:05:45 @Info @-196359280 @supplicant_ag...@resetsupplicantlibrary (IN)
[ResetSupplicantLibrary]
@SupplicantAgent.c(828) @wimaxd
16:05:45 @Info @-196359280 @supplicant_ag...@resetsupplicantlibrary:
erasing DS context [ResetSupplicantLibrary]
@SupplicantAgent.c(831) @wimaxd
16:05:45 @Info @-196359280 @supplicant_ag...@resetsupplicantlibrary:
erasing last eap request data [ResetSupplicantLibrary]
@SupplicantAgent.c(837) @wimaxd
16:05:45 @Info @-196359280 @supplicant_ag...@resetsupplicantlibrary (OUT)
[ResetSupplicantLibrary]
@SupplicantAgent.c(840) @wimaxd
16:05:45 @Notice @-196359280 @supplicant_ag...@supplicantagent_shutdown
Succeed! [SupplicantAgent_Shutdown]
@SupplicantAgent.c(1275) @wimaxd
16:05:45 @Info @-196359280 @KDAPI_ADAPTER @Waiting for driver connect
thread to close [DriverMonitor_Fini]
@DriverMonitor.c (451) @wimaxd
After printing the "starting ndns" message above, InitPipeLogic() in Act.c
calls NDnSAgent_Initialize(), which immediately calls "TRACE(TR_MOD_NDNS_AGENT,
TR_SEV_NOTICE, ("NDnS Agent - initialization started"));" but I don't see that
message anywhere in the logs. So, I have no clue how to figure out what's
wrong, since it basically just looks like NDnSAgent_Initialize() isn't actually
being called.
Any help would be appreciated.
Thanks.
-Paul
_______________________________________________
wimax mailing list
[email protected]
http://www.linuxwimax.org/mailman/listinfo/wimax
