Hi there
>The 5350 product ID 0x1403 apparently is working under Windows so not
>sure what may be going on.
Let's try to confirm that apparently part; normally the kind of errors you
report:
...
[ 39.361610] i2400m_usb 1-6:1.0: boot-mode cmd 2: incomplete transfer
(512 vs 16384 submitted)
...
tend two mean the hardware is bad; however, in this case, if Windows works,
there is somethin going on in the driver. As well, I was just looking at the
code and I am concerned, because a line like:
BM-CMD: short write (%u B vs %zu expected)
was expected.
So I realized there is a line that might be masking, if anything, the real
return
value. Could you apply
--- a/drivers/net/wimax/i2400m/usb-fw.c
+++ b/drivers/net/wimax/i2400m/usb-fw.c
@@ -135,7 +135,6 @@ retry:
result);
goto retry;
}
- result = len;
if (do_autopm)
usb_autopm_put_interface(i2400mu->usb_iface);
return result;
and try again?
Won't fix it, but might give us better information.
Thanks!
_______________________________________________
wimax mailing list
[email protected]
http://lists.linuxwimax.org/listinfo/wimax
