Current driver didn't implement the .reset_resume method. The i2400m normally always reset on a comeback from system standby/hibernation.
This requires previously applied commits to cache the firmware image file. Signed-off-by: Inaky Perez-Gonzalez <[email protected]> --- drivers/net/wimax/i2400m/usb.c | 16 ++++++++++++++++ 1 files changed, 16 insertions(+), 0 deletions(-) diff --git a/drivers/net/wimax/i2400m/usb.c b/drivers/net/wimax/i2400m/usb.c index 77d08d9..07653de 100644 --- a/drivers/net/wimax/i2400m/usb.c +++ b/drivers/net/wimax/i2400m/usb.c @@ -624,6 +624,21 @@ out: static +int i2400mu_reset_resume(struct usb_interface *iface) +{ + int result; + struct device *dev = &iface->dev; + struct i2400mu *i2400mu = usb_get_intfdata(iface); + struct i2400m *i2400m = &i2400mu->i2400m; + + d_fnstart(3, dev, "(iface %p)\n", iface); + result = i2400m_dev_reset_handle(i2400m, "device reset on resume"); + d_fnend(3, dev, "(iface %p) = %d\n", iface, result); + return result < 0 ? result : 0; +} + + +static struct usb_device_id i2400mu_id_table[] = { { USB_DEVICE(0x8086, USB_DEVICE_ID_I6050) }, { USB_DEVICE(0x8086, 0x0181) }, @@ -643,6 +658,7 @@ struct usb_driver i2400mu_driver = { .name = KBUILD_MODNAME, .suspend = i2400mu_suspend, .resume = i2400mu_resume, + .reset_resume = i2400mu_reset_resume, .probe = i2400mu_probe, .disconnect = i2400mu_disconnect, .id_table = i2400mu_id_table, -- 1.6.2.5 _______________________________________________ wimax mailing list [email protected] http://lists.linuxwimax.org/listinfo/wimax
