On Fri, 2010-11-26 at 23:42 +0300, Lockywolf __ wrote: 
> i have newest releases of  driver(kernel 2.6.36.1), firmware, tools,
> manager and wpa_supplicant(patched)
> from linuxwimax.org
> 
> Slackware 13.1
> 
> I cannot connect to the network.
> 
> r...@netbook:/var/log/wimax# wimaxcu connect network 41
> In Manual Scan and Manual Connect Mode
> Trying to find the networks ...
> Scanning 80% Done ======-
> Network found.
> NSP : Yota
>       ID          : 21
>       Signal      : Good
>       RSSI        : -70 dBm
>       CINR        : 11 dB
>       Network Type: Home Network
>       Activated.
> 
> Network found.
> NSP : COMSTAR
>       ID          : 41
>       Signal      : Fair
>       RSSI        : -75 dBm
>       CINR        : 4 dB
>       Network Type: Home Network
>       Activated.
> 
> Scanning operation completed.
> Connecting to COMSTAR Network...
> Connection failure
> r...@netbook:/var/log/wimax# wimaxcu connect network 21
> In Manual Scan and Manual Connect Mode
> Trying to find the networks ...
> Scanning 80% Done ======-
> Network found.
> NSP : Yota
>       ID          : 21
>       Signal      : Good
>       RSSI        : -69 dBm
>       CINR        : 11 dB
>       Network Type: Home Network
>       Activated.
> 
> Network found.
> NSP : COMSTAR
>       ID          : 41
>       Signal      : Poor
>       RSSI        : -85 dBm
>       CINR        : 0 dB
>       Network Type: Home Network
>       Activated.
> 
> Scanning operation completed.
> Connecting to Yota Network...
> Connection failure
> 
> I can't connect to any of the networks.
> 
> Logs attached.
> 
> 
> Where to dig?

I dislike the logs this thing produces :/

Anyway, around 19:21:31, the supplicant suddenly stops processing
requests; I wonder what is going on.

Comstar, the way you have it scanned, won't probably work, -85 dBm is
too low. But Yota should work. However, it might be using the Yota
credentials for Comstar -- I can't tell because your log file is mixed.

Could you re-run this cleaning logs in between runs?

$ killall -9 wimaxd
$ rm -f /var/log/wimax/*
$ wimaxd -i wmx0 -d          # in the foreground
$ wimaxcu connect network 21
$ killall -9 wimaxd

Post the files in /var/log/wimax and also whatever wimaxd is printing in
the console?

Thanks,


_______________________________________________
wimax mailing list
[email protected]
http://lists.linuxwimax.org/listinfo/wimax

Reply via email to