Thanks again for making things clear!

Regards
Sridhar


> As of 802.16-2009 there is no more mention about 'mesh'.
> So any kind of WiMAX hardware can support only BS or CPE mode of
> operation.
> Intel hardware, linux support for which is discussed here, is CPE mode
> hardware and cannot operate as BS.
> And I believe it also cannot support 802.16-2009 fixed mode operation
> (former 802.16-2004 or 802.16d).
> Also, I believe, that there is no CPE chipset, which designed to support
> BS
> mode.
> Some of 802.16-2004 chipsets, designed for BS mode, can support CPE mode
> though.
> But there is no open-source support for it.
>
>
>
> 2011/3/7 Sridhar K. N. Rao <[email protected]>
>
>> Thanks a lot for the response.
>> Is it OK to assume that  as of now, there is no wimax hardware that
>> supports adhoc mode?
>> or it is advised to carry out a survey?
>>
>> Regards
>> Sridhar
>>
>>
>> > On Thu, 2011-03-03 at 09:34 +0530, Sridhar K. N. Rao wrote:
>> >> Hello All,
>> >>
>> >> I'm new to this list, and this is my first mail!
>> >>
>> >> Referring to the mail by Mr. Marcel Holtmann, sometime in 2009, in
>> this
>> >> list,
>> >>
>> >> "...... So to have any kind of mesh operation you would either need
>> >> to turn your WiMAX card into a basestation or have some ad-hoc mode
>> >> between two cards ...."
>> >>
>> >> Is it possible to achieve one of the above mentioned options (may be
>> the
>> >> latter one), using the existing hardware?  Like Intel 6250?
>> >>
>> >> If it is possible, can we also assume the current linux-wimax drivers
>> >> can
>> >> be updated to implement the IEEE 802.16d extensions?
>> >
>> > The Intel i2400m-based hardware, as a consequence of a set of design
>> > decisions, receives and processes only the PDUs destined to it; thus,
>> it
>> > is not usable to implement basestation or anything similar to ad-hoc
>> > mode.
>> >
>> >
>> >
>>
>>
>
> --
> //batcilla
>


-- 
Dr. Sridhar K. N. Rao
Research Lead
SRM Research Institute
Bangalore

_______________________________________________
wimax mailing list
[email protected]
http://lists.linuxwimax.org/listinfo/wimax

Reply via email to