Hi all. I just need a little more help to get connected. I am using the
Intel 6250 embedded chipset and I installed Mint 12 with all updates and
complied the packages. I blacklisted iwlagn (wifi) and was able to remove
the softblock on wimax.
*****@Mint12 ~ $ rfkill list*
0: i2400m-usb:1-1.1:1.0: WiMAX
Soft blocked: no
Hard blocked: no
*****@Mint12 ~ $ wimaxcu scan*
Network found.
NSP : CLEAR
ID : 2
Signal : Fair
RSSI : -70 dBm
CINR : 8 dB
Network Type: Home Network
Activated
Network found.
NSP : SPRINT
ID : 47
Signal : Fair
RSSI : -70 dBm
CINR : 8 dB
Network Type: Home Network
Activated
Network found.
NSP : Comcast
ID : 48
Signal : Fair
RSSI : -70 dBm
CINR : 8 dB
Network Type: Home Network
Activated
Network found.
NSP : Time Warner Cable 4G
ID : 51
Signal : Fair
RSSI : -70 dBm
CINR : 8 dB
Network Type: Home Network
Activated
*****@Mint12 ~ $ wimaxcu connect network 2*
Connecting to CLEAR Network...
Connection failure
*****@Mint12 ~ $ wimaxcu plist*
Profile List:
ID : 2
Name: CLEAR
ID : 47
Name: SPRINT
ID : 48
Name: Comcast
ID : 51
Name: Time Warner Cable 4G
ID : 21
Name: Yota
ID : 20
Name: UQ WiMAX
ID : 16205833
Name: VMAX
ID : 41
Name: COMSTAR
*****@Mint12 ~ $ wimaxcu connect profile 2*
*Connecting to CLEAR Network...*
*Connection failure*
The reason I upgraded the OS was because it is using Network manager 0.9
and there is an "Enable WiMax Mobile Broadband" option. However, there
isn't a listing for it in NM itself once it's been selected. I called Clear
and they have no idea how to do this. Since the service is based on my MAC
address, a UN/PW is uneeded. I looked into Mobile Broadband but it only
covers GSM/CDMA networks, which Clear is not. In previous versions of Mint
(Ubuntu) wmx0 was listed in Wired Networks, which it isn't any longer.
Also, wmx0 used to be listed here:
*****@Mint12 ~ $ ifconfig*
eth0 Link encap:Ethernet HWaddr bc:ae:c5:08:7d:36
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:46
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1796 errors:0 dropped:0 overruns:0 frame:0
TX packets:1796 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:348372 (348.3 KB) TX bytes:348372 (348.3 KB)
vmnet1 Link encap:Ethernet HWaddr 00:50:56:c0:00:01
inet addr:172.16.245.1 Bcast:172.16.245.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
vmnet8 Link encap:Ethernet HWaddr 00:50:56:c0:00:08
inet addr:172.16.189.1 Bcast:172.16.189.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
*****@Mint12 ~ $ iwconfig*
lo no wireless extensions.
eth0 no wireless extensions.
wmx0 no wireless extensions.
vmnet1 no wireless extensions.
vmnet8 no wireless extensions.
What am I missing? Help please. I'm so close! Thanks.
_______________________________________________
wimax mailing list
[email protected]
http://lists.linuxwimax.org/listinfo/wimax
