Marc,

Just being picky - unless you are sure that the majority of swap file usage is 
when reading data files, I would put the swap/paging
file on the partition nearest the start of the drive.

That is because the time taken to read/write data to the swap/paging file is on 
average half the rotation time + the time for the
data to pass under the heads, plus the time taken to move the heads from 
wherever they were to the data location,
- and then add in that movement time for the heads to be put back to where they 
were needed to read/write the data, or program file

Also having a permanent swap file saves the system time that would be required 
to access and update the allocation tables as the
swapfile space is increases by the small increments required during processing.

Additionally, having the swap file on the boot partition means you can boot 
with just that partition rather than needing to have the
two partitions properly setup, and assigned the expected letters C: and E:

JimB.



----- Original Message ----- 
From: "MARC SIMS" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, May 17, 2005 11:58 AM
Subject: Re: Software: A look at Longhorn Part II


In Longhorn the ability to change the partition sizes "on the fly" would be a 
very nice feature
to have built into the OS. Then if that were the case you may not even need a 
separate partition
management utility like either Symantec's Partition Magic (formerly owned by 
PowerQuest) or
Vcom's Partition Commander 9.01 of which I use now to manage my own partitions.

 I've just signed up for the Windows 2003 Enterprise Server RC2 and downloaded
it and installed it on my machine which is running Windows XP PRO SP2. I have a 
Maxtor
DiamondMax Plus 9 200GB HD of which is partitioned with C:\ 26GB partition, D:\ 
74GB
and E:\ 93GB.

 I place my primary OS (Windows XP Pro ) and system utilities on the C: 
partition; all applications and Windows 2003 Server on the
D:\ and data, pictures, windows system swap file and video and E:\. This way if 
any if the primary partitions should get corrupted I
can backup all the data from the E: partition.

Marc Sims
Technician I
Technology Services
Prince George's Community College
301 Largo Rd.
Largo, MD 20774-2199
Email: [EMAIL PROTECTED]

>>> [EMAIL PROTECTED] Monday, May 16, 2005 >>>
At 05/16/2005, MARC SIMS wrote:
>Check out the Start Menu and Explorer I realy think that they are
>the real improvements that everyone wants on this list.

I'm still using the Classic Start menu; I think the thing I find most
annoying about the XP Start menu is "All Programs" shows everything
all the time instead of paring the list down to the things I've used
recently.  That's probably the biggest reason I've stuck with the Classic menu.

Having a graphic display of disk space without having to open the
drive's properties will be nice for some, I guess.  Any chance of it
including the ability to change partition sizes on the fly?  That
would be a nice feature to have when you figure out after everything
is set up that you probably over allocated the system drive and
short-changed your data and programs drives.

-

--
                ----------------------------------------
ALL messages to the list MUST include a descriptive subject.
To Change your email Address for this list, send the following message:
 CHANGE  WIN-HOME  your_old_address  your_new_address
 to:  [EMAIL PROTECTED]
Note carefully that both old and new addresses are required.

--
                ----------------------------------------
ALL messages to the list MUST include a descriptive subject.
To Change your email Address for this list, send the following message:
 CHANGE  WIN-HOME  your_old_address  your_new_address
 to:  [EMAIL PROTECTED]
Note carefully that both old and new addresses are required.

Reply via email to