Re setting of CS or master/slave that depends on the connection cable if the cable has the different connections on the headers (usually so that the end connections are master's, and the middle one is missing the master connection, so becomes a slave) then you should use CS providing the drives on the cable accept that setting, and you want the mid connection to be for the slave
If not, then you should use the master slave settings - and, preferably a non-differentiated interface cable JimB. ----- Original Message ----- From: "Sam Franc" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, June 09, 2005 2:29 AM Subject: HARD: New USB drive > I just got a KINGWIN enclosure and am putting a 160 gig Seagate in it. > I could not get it to be recognized in the enclosure. > A connected it as a second drive in my box. > It was not recognized directly. > i ran PM 8 and it reconized it so I was able to set it up and format it. > I am running W2000 and it was only recognized for 131 gigs and not the > 160 on the label. > Is there any way I can pick up the extra 30 gigs? > Also how should I set the jumper in the Kingwin? > Master or cable select? > Sam > > -- > ---------------------------------------- > WIN-HOME Archives: http://PEACH.EASE.LSOFT.COM/archives/WIN-HOME.html > Contact the List Owner about problems: [EMAIL PROTECTED] > Unofficial Win-Home List Members Profiles Page > http://winhome.wavijo.com/ > > -- ---------------------------------------- The WIN-HOME list is hosted on a Windows 2000(TM) machine running L-Soft international's LISTSERV(R) software. To unsubscribe, write to [EMAIL PROTECTED] If you have questions about the list, write to [EMAIL PROTECTED]
