Andy Medina wrote:
I am not sure why the laptop wouldn't be able to use the
neighbor's wap if it has no security turned on. MAC address
filtering perhaps, but then, DHCP on the laptop wouldn't be
working. Could be the signal's locked to the wap, but not
actually "connected"? There are two "connections" to consider
in a wireless data link, the *radio* connection, and the
*ethernet* connection. But I would expect some indication of
ethernet connection failure.
A firewall setting on the laptop could also be preventing
internet access, if the IP settings were set for dhcp, and if
they have changed to match the other wap's dhcp server
settings. But I would expect some indication from the firewall
about any changes.
You might want to limit the laptop to your wap (or other
preferred waps) only. I do not have access to a wireless
machine at the moment, so I can not say exactly where the
following items are located. But they should be on the Wireless
tab of the wireless device properties page. I recall there is a
global wireless setting to not allow automatic connections to
non-preferred waps. Or it may be the other way round, allow
automatic connections only to preferred waps. Then clean out
the Preferred waps list, leaving only those you wish to use.
Each preferred wap will have an option to automatically connect
if within range.
Instant Wireless Network PC Card V3.0
Auto authentication based on WEP
Channel 6
No encrypt
Net type: infrastructure
SSID: wireless
WEP Passphrase: (blank)
Use Windows to configure wireless network settings
There are two defined networks (one is mine), but *none is available*
(the neighbor's is gone; mine doesn't show up)
My wireless network is set for no keys
My wireless router:
Model Number B90-327W15-06
Description WireSpeed Data Gateway
Chan 6, mixed mode, 4x sppt disabled, hide SSID disabled
Security turned OFF (just for this test)
Basic 802.11b rate 1Mbps
No wireless stations are listed.
Obviously the gateway and the NIC are not talking to one another, but I
don't know where to go from here.
Thanks.
--
----------------------------------------
To Change your email Address for this list, send the following message:
CHANGE WIN-HOME your_old_address your_new_address
to: [EMAIL PROTECTED]
Note carefully that both old and new addresses are required.
