If one copies their Total Commander folder to a USB thumb drive then
edit the path in the WinCmd.ini file replacing the drive & top level
folder with %COMMANDER_PATH% then TC will run straight from the USB
thumb drive. Keep in mind if TC needs to use a temp folder for
extractions etc then it will use the systems temp folder by default.
I suppose one could run from the cmd line set temp=drive:\temp\ that
is on the thumb drive & you could make the temp variable a TC
subfolder with %COMMANDER_PATH% in a TC menu item so all you would
have to do is click the menu to alter the system's temp folder
location. If you do this then you should reboot the system after
pulling your thumb drive unless you remember where the default location was.
FWIW all this is much easier running from an XpPe Cd as the temp
variable is set to a ramdrive on boot up & TC runs directly from the
cd so the system is not touched unless you want or need to.
-----------+----------
a Windows Xp based
Diagnostic & Recovery CD
<http://www.xppe.com/>
--
----------------------------------------
To Change your email Address for this list, send the following message:
CHANGE WIN-HOME your_old_address your_new_address
to: [EMAIL PROTECTED]
Note carefully that both old and new addresses are required.
