Hi,
The PCanywhere issue was an issue I had also with version2. One of the guys
on the beta-list filled me in on the beauty of VNC and I've never looked back.
I remoteley administer a couple of NT4 Servers via the web and an old netware
Lite DOS system by dialing direct with pcanywhere in win4lin to a dos
pcanywhere host server.(I haven't tried it in ver3 yet but it worked fine in
ver2).
http://www.uk.research.att.com/vnc/
and for some new work there is the tridiavnc update at
http://www.tridiavnc.com
hope this helps
RKS
On Tue, 5 Jun 2001 12:32, you wrote:
> Hi,
> Well, up until this test Win4Lin 3.0 had really addressed all of the
> problems I had seen in previous releases and half way through the setup of
> all of this I was hopeful.
>
> My machine is RH 7.1 stock, with the prebuilt Win4Lin kernel installed.
> My permanent license came through with no problems. I managed to get a
> couple of apps installed and working, and then went for the tough one -
> Using PC Anywhere under Win4Lin to control a remote PC. If I could do this,
> then basically I could give up Windows as a at home working environment and
> keep Windows only for my musical endeavors. So far, not that lucky.
>
> The Microsoft VPN client installed fine, and I am able to connect to my
> office just fine. Once connected, I correctly receive a remote IP address
> via the office DHCP server, and can ping known addresses inside my office.
> Everything looks good.
>
> Then I installed PC Anywhere 10 Remote Only and attempted to connect to
> my office PC, and unfortunately PC Anywhere says there's nothing to connect
> to. I know there is because I can drop over to my Windows PC at home and
> connect to the office PC, and my Win4Lin environment can ping my office PC,
> but something going on here can't find the PC Anywhere host at the far end.
>
> I tried to use PC Anywhere to connect to my home PC and this didn't work
> either, so I don't think it's the VPN connection.
>
> I'm wondering if anyone has:
>
> 1) Tried this yet?
>
> 2) Does anyone at NeTraverse know that this WILL NOT work for a known
> technical reason?
>
> 3) Know if it could be the default ipchains setup in RH 7.1? I installed
> with 'normal' security, whatever that means. How can I make sure that PC
> Anywhere's port (5631, 5632) are open and not stopping this from working?
> (I know nothing about administering ipchains.)
>
> Again, thanks in advance for any ideas.
>
> Regards,
> Mark
>
> _______________________________________________
> Win4Lin-users mailing list
> [EMAIL PROTECTED]
> https://lists.netraverse.com/mailman/listinfo/win4lin-users
_______________________________________________
Win4Lin-users mailing list
[EMAIL PROTECTED]
https://lists.netraverse.com/mailman/listinfo/win4lin-users
