Hi all Anybody using RollBack RX 10 from <http://www.horizondatasys.com> might be interested to know that there is a command sequence which you can use to defragment your drive using third party utilities such as Microsoft's own "Defrag", or Diskeeper Pro 12/later.
I will outline the procedure below for the reference of anybody concerned, then it will also be stored in the list's archives. Here is the sequence you need to follow: In order to disable RollBack, execute this command from the command prompt: shieldcmd.exe /defrag enable | Enables Windows /3rd party Defragmentation utility. Note: using Defrag will actually produce inferior performance to defragmentation of your baseline snapshot using RollBack. So unless you're a Diskeeper user, I would strongly recommend that you don't bother with this. Post-Defragmentation, follow this sequence: shieldcmd.exe /defrag disable | disables Windows/3rd Party Defragmenter Once you have followed all of the above steps, you must update your RollBAck baseline. To do this, use the system tray icon and double-click, (press Enter) on the RollBack RX icon. Then, under the "Advanced" tab within the task list, click on "Upate Baseline" (Note: I deliberately said "Upade" rather than "Update" because despite my informing them numerous times, they won't fix that little typo.) I hope some find this little article of mine of some use. Kind regards <--- Gordon Smith ---> E-Mail: <[email protected]> Telephone: United Kingdom: Free Phone: 0800 8620538 Europe and other non-specified: +44 1642 688095 United States Of America And Canada: +1 646 9151493 Australia: +61 38 8205930 Or: +61 39 0284505 Fax: +44 1642 365123 Follow Us On Twitter: <http://twitter.com/maciosaccess> Skype: <callto:mac-access-dot-net> ------------------------------ ======================================= To post to this group, please send your message to: [email protected] The Windows-Access E-Mail forum is guaranteed malware, spyware, Trojan, virus and worm-free To modify your subscription options, please visit your personalise subscriber options page, located at http://mail.tft-bbs.co.uk/mailman/listinfo/windows-access You can find an archive of all messages posted to the Windows-Access forum at either of the following websites: http://mail.tft-bbs.co.uk/pipermail/windows-access/index.html Or: <http://www.mail-archive.com/[email protected]> you may also subscribe to this list via RSS. The feed is at: <http://www.mail-archive.com/[email protected]/maillist.xml> --------------------------------------- [email protected]
