On Mon, 22 Apr 2002, Oliver Sampson wrote: > Howdy, > I'm seeing a strange behavior and I thought I'd let the Devel > community know about it: > > While using Agent v1.8, and while having a CD in my CD tray (although > unmounted!), if I start agent under wine, I'm able to open and close > my CD tray. However, if I try to use the attachment window to attach > something, the CD-ROM drive spins up, and I'm unable to open it. Even > if I attach nothing, the CD-ROM drive is claimed by wine so that I > can't eject the Drive. Once I exit agent, the drive is released so > that I can open the drive. Note that the CD-ROM was never mounted. > Even a check during the blocked period shows no mounted device, even > though the "eject' command says "device busy." > > Interestingly, when I just tried this again for this email, I noticed > the following output messages (It seems that there are some floppy > drive assumptions, also.)
If you don't want Wine to attempt raw device access, don't give it a "Device" = in the [Drive X] entry, I think. Your average Windows app is inquisitive and tries to look at all drives that have defined devices. > > Oliver > > ---output---- > err:dosfs:DRIVE_ReadSuperblock Couldn't open device '/dev/fd0' for > drive A: ! (no permission) > err:dosfs:DRIVE_ReadSuperblock Can't read drive volume info ! Either > pre-set it or make sure the device to read it from is accessible ! > Perhaps you have not properly edited or created your Wine > configuration file. > This is (supposed to be) '/home/olsam/.wine/config' ;; MS-DOS drives configuration ;; ;; Each section has the following format: ;; [Drive X] .... ;; "Device"="/dev/xx" (only if you want to allow raw device access) Lawson If you don't want my peaches, then don't shake my tree.
