I hope someone can help my problem receiving packets in Windows7
I am sending data by UDP packets from an FPGA through 10GB card
(Chelsio). Using VC++ 2010 to compile code to receive them.
All packets arrive, no losses seen, but the problem is with the proper
*operation of pcap_setmintocopy() function.*
*I send 64 packets with 8234 bytes each. Receiving them through
pcp_next_ex() and I only get 31 packets (sometimes 62, sometimes 47, 50
packets) before the timeout occurs. After timeout the rest of the
packets arrives.
*
I set the minimum amount of data in the kernel buffer that causes a read
from the application to return (unless the timeout expires) to be 1 byte
or it to be all 8234x64 bytes, no difference. Looks like the setmintocpy
function has no effect on my kernel buffer to be copied to my
application. If I send another set of 64 packets - data arrives into
pcp_next_ex(), still only in lamp of 31 (62, 47,50) packets
That is a big problem for my application.
*Is there anything I am doing wrong or need to change something in the
system/driver to make setmintocopy function to operate properly?
*
Thanks a lot for your help,
Anton Tremsin
--
Anton S. Tremsin, Ph.D.
Space Sciences Laboratory
University of California at Berkeley
Berkeley, CA 94720
Tel: (510) 642 4554
_______________________________________________
Winpcap-users mailing list
[email protected]
https://www.winpcap.org/mailman/listinfo/winpcap-users
