Hi Sven,
I have an application where I am using npcap and I also have the need to detect
the media status changes. To do that I query NDIS to get that information:
https://msdn.microsoft.com/en-us/library/windows/hardware/ff569604(v=vs.85).aspx
Here is an example:
if(IoctlNdisQueryGlobalStats(Iface->IOCTLhandler, OID_GEN_MEDIA_CONNECT_STATUS,
&ConnectedState, sizeof(ConnectedState), (PUINT)&ReturnedCount) ==
ERROR_SUCCESS)
{
return ConnectedState == NdisMediaStateConnected;
}
Hope this information could be helpful.
Melhores Cumprimentos / Best Regards
Nuno Antonio Dias Ferreira
Unidade de Automação de Sistemas de Energia / Power System Automation Unit
Efacec Energia, Máquinas e Equipamentos Elétricos, S.A.
[EFA Logo]
Disclaimer<http://efacec.com/email.jpg>
From: [email protected]
[mailto:[email protected]] On Behalf Of ?????V5
Sent: 5 de fevereiro de 2016 04:44
To: [email protected]
Subject: Re: [Winpcap-users] Windows 10 support for WinPcap
On Fri, Feb 5, 2016 at 3:56 AM, Mark Pizzolato - Winpcap-Users
<[email protected]<mailto:[email protected]>>
wrote:
The inverted call model might be useful in an abstract way to get notified of a
media
state change, however, the question then comes back to how to convey that detail
to the application which is using the libpcap APIs.
Since the only APIs that an application which already has a pcap session opened
is using are: pcap_next_ex, pcap_dispatch, pcap_loop and possibly
pcap_sendpacket
pcap_next_ex, pcap_dispatch and pcap_loop are defined to return -1 on an error.
Is media state change an error?
Is media offline an error?
I prefer to use the phrases in ncpa.cpl.
If the adapter disconnects (like Wi-Fi), libpcap API should only report
time-out (you don't get any new packets).
If the adapter is disabled, libpcap API may report error (or time-out)? I
didn't try this. One thing for sure is that you can't get new packets too. This
thing should not happen when using Npcap/WinPcap. Because when listing adapters
with Npcap/WinPcap, disabled adapters never show up on the list. So
Npcap/WinPcap assumes that the adapters it uses is always kept as enabled.
pcap_sendpacket is defined to return -1 if a packet wasn’t successfully sent.
It would seem that returning -1 when the media is offline makes
sense
This makes sense to me.
I don’t know for sure how WinPcap behaves under these conditions, but it
seems that it npcap should reliably report errors under the media offline state.
Is there a reason it can’t?
Npcap actually doesn't report errors any better than WinPcap. There's even a
chance that Npcap behaves different on reporting errors with WinPcap. Because
Npcap uses NDIS6 and WinPcap uses NDIS5.
From:
[email protected]<mailto:[email protected]>
[mailto:[email protected]<mailto:[email protected]>]
On Behalf Of Jiyang Hu
Sent: Thursday, February 4, 2016 11:18 AM
To: [email protected]<mailto:[email protected]>
Subject: Re: [Winpcap-users] Windows 10 support for WinPcap
@Sven: you need something called - Inverted Call Model
The Inverted Call Model in KMDF -
OSR<https://www.osr.com/nt-insider/2013-issue1/inverted-call-model-kmdf/>
[Image removed by sender.
image]<https://www.osr.com/nt-insider/2013-issue1/inverted-call-model-kmdf/>
The Inverted Call Model in KMDF -
OSR<https://www.osr.com/nt-insider/2013-issue1/inverted-call-model-kmdf/>
One of the most common questions we see from students, clients, and new Windows
driver Read more
View on
www.osr.com<https://www.osr.com/nt-insider/2013-issue1/inverted-call-model-kmdf/>
Preview by Yahoo
On Thursday, February 4, 2016 12:49 PM, Sven Kerschbaum
<[email protected]<mailto:[email protected]>> wrote:
@Yang: It is not possible to get notifications of media state changes by the
API which you proposed in your previous post. It provides only notifications
about IP table changes.
Am 04.02.2016 16:31 schrieb "Sven Kerschbaum"
<[email protected]<mailto:[email protected]>>:
Hi Yang,
thanks for providing me the detailed information about Npcap. I will
definitively have a look at it and try it.
Cheers,
SK
2016-02-04 13:04 GMT+01:00 食肉大灰兔V5
<[email protected]<mailto:[email protected]>>:
Hi Sven,
Npcap (https://github.com/nmap/npcap) has better performance because of NDIS 6.
It also has several new features:
I actually didn't add a function about making user software getting notified
about media state changes. From my knowledge I don't know there's any support
of such a function in libpcap. libpcap is an interface standard followed by
WinPcap/Npcap. However, I think you can do it using native Windows APIs (like
Receiving Notification of Network Events in
https://msdn.microsoft.com/en-us/library/windows/desktop/aa366334(v=vs.85).aspx).
And if you have any improvement advice about Npcap, I will consider it:)
Cheers,
Yang
_______________________________________________
Winpcap-users mailing list
[email protected]<mailto:[email protected]>
https://www.winpcap.org/mailman/listinfo/winpcap-users
_______________________________________________
Winpcap-users mailing list
[email protected]
https://www.winpcap.org/mailman/listinfo/winpcap-users
