are you behind a switch? i don't know anything about your adapter, but if
it's pretty standard, then there shouldn't be any problem. if you're behind
a switch then you would only see your own traffic, plus broadcast stuff.
Jake Helfert
----- Original Message -----
From: "Jon Bailey" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, September 23, 2002 9:35 AM
Subject: [WinPcap-users] SiS900 Adapter - trouble w/ promiscuous capture
Problem: WinPcap installs and appears to execute fine, but I am only
seeing traffic to / from my own machine, not any of the other
traffic on the hub.
I am using an SiS900 ethernet adapter built into my workstation's
motherboard.
I am running Windows XP Pro, SP1.
I have tried the most recent SiS driver from Windows Update (1.16.0.0),
and the driver from SiS (1.14), and both WinPcap 2.3 and 3.0a2.
I can see the 'NPF' driver running in the System Drivers info pane.
I have tried both Ethereal and Windump.
Any suggestions?
-jon
======================
This is the WinPcap users list. It is archived at
http://www.mail-archive.com/[email protected]/
To unsubscribe use
mailto: [EMAIL PROTECTED]?body=subscribe
======================
==================================================================
This is the WinPcap users list. It is archived at
http://www.mail-archive.com/[email protected]/
To unsubscribe use
mailto: [EMAIL PROTECTED]?body=unsubscribe
==================================================================
