f6dro wrote:
> Hello Alberto ,
>
> Just a question . Are the SDR-IQ drivers we can find on ur web page supposed
> to work with Winrad under Vista?
> I've tried with a friend to day , and ,
>
> -as soon as Winrad is downloaded and run on Vista alone : no pb, it works.
> -The SDR-IQ works OK also alone under it's native software
>
> Bus as soon as the drivers for the SDR-IQ board are downloaded , Winrad no
> longer works , and crash , even with no SDR-IQ connected. The simple fact
> that the drivers are in the same directory than Winrad makes the program no
> longer working ( of course under Vista , under XP it is OK)
>
> 73 and HNY everyone on here
> Dom/F6DRO
Dom,
I haven't tested the SDR-IQ support under Vista, because I don't have
Vista installed here, and, for the moment
being, I prefer to stay with XP. And in any case my interfacing DLL for the
SDR-IQ does very little apart from calling
the functions of an ActiveX written by RFspace. So I suspect that what is not
compatible with Vista is that ActiveX,
which is outside my control...
Have you reverse checked what you write, I mean, if you erase from the Winrad
directory the files related to the SDR-IQ
support, does Winrad starts again to work normally ?
73 Alberto I2PHD HNY 2008
_______________________________________________
Winrad mailing list
[email protected]
http://winrad.org/mailman/listinfo/winrad_winrad.org
