The ip address for the wg0 interface on peer 2 is set to 10.100.1.2/32 so peer2 has no route to reach 10.100.1.1. You either need to set a route to 10.100.1.1 on peer 2 or change the address on peer 2 so the subnet it is in includes 10.100.1.1. For example 10.100.1.2/24.
On Thu, Mar 15, 2018 at 10:07 PM, Vikas <kedia.vi...@gmail.com> wrote: > Here is the config on peer 1 (Vmware VM running ubuntu 16.04): > ================================================= > > vk@ubuntu /g/r/c/w/server> ifconfig ens33 > ens33 Link encap:Ethernet HWaddr 00:0c:29:c8:6c:d5 > inet addr:10.0.1.77 Bcast:10.0.1.255 Mask:255.255.255.0 > inet6 addr: fe80::5b06:24b6:c9e4:954e/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:327949 errors:0 dropped:0 overruns:0 frame:0 > TX packets:87146 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:351155285 (351.1 MB) TX bytes:12179516 (12.1 MB) > > > vk@ubuntu /g/r/c/w/server> more etc-wireguard-wg0.conf > [Interface] > Address = 10.100.1.1/24 > ListenPort = 51820 > PostUp = iptables -A FORWARD -i wg0 -j ACCEPT; iptables -t nat -A > POSTROUTING -o ens33 -j MASQUERADE > PostDown = iptables -D FORWARD -i wg0 -j ACCEPT; iptables -t nat -D > POSTROUTING -o ens33 -j MASQUERADE > PrivateKey = CPQLRq40QGY3+8yn2LlYb1x3zU/3/Ki+A4QjVYgbakY= > SaveConfig = true > > [Peer] > PublicKey = uL8bs5596DJO7BMnrIVG5btvr4LTzlbx1ovwHe59NBc= > AllowedIPs = 10.100.1.2/32 > > > vk@ubuntu /g/r/c/w/server> ifconfig wg0 > wg0 Link encap:UNSPEC HWaddr > 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 > inet addr:10.100.1.1 P-t-P:10.100.1.1 Mask:255.255.255.0 > UP POINTOPOINT RUNNING NOARP MTU:1420 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:459 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > > > Here is the config on peer 2 (Vmware VM running ubuntu 18.04): > ================================================== > > root@ubuntu /g/r/c/w/client# ifconfig ens33 > ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 > inet 10.0.1.71 netmask 255.255.255.0 broadcast 10.0.1.255 > inet6 fe80::c4d7:35d6:306b:fc91 prefixlen 64 scopeid 0x20<link> > ether 00:0c:29:b6:bb:18 txqueuelen 1000 (Ethernet) > RX packets 532611 bytes 765847699 (765.8 MB) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 71767 bytes 5458394 (5.4 MB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > root@ubuntu /g/r/c/w/client# more etc-wireguard-wg0.conf > [Interface] > Address = 10.100.1.2 > PrivateKey = AMZXJ1vBx6OOnZlbnYHuShTBAPuOzwCgweG73BS/4WY= > > [Peer] > PublicKey = KNuvytvYu9NktxybaOHsCF11q96IGfc+dT/Dv8L6KB0= > AllowedIPs = 0.0.0.0/0 > Endpoint = 10.0.1.77:51280 > > > root@ubuntu /g/r/c/w/client# ifconfig wg0 > wg0: flags=209<UP,POINTOPOINT,RUNNING,NOARP> mtu 1420 > inet 10.100.1.2 netmask 255.255.255.255 destination 10.100.1.2 > unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 > txqueuelen 1000 (UNSPEC) > RX packets 0 bytes 0 (0.0 B) > RX errors 0 dropped 0 overruns 0 frame 0 > TX packets 10 bytes 1480 (1.4 KB) > TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 > > > root@ubuntu /g/r/c/w/client# ping 10.0.1.77 > PING 10.0.1.77 (10.0.1.77) 56(84) bytes of data. > 64 bytes from 10.0.1.77: icmp_seq=1 ttl=64 time=0.464 ms > 64 bytes from 10.0.1.77: icmp_seq=2 ttl=64 time=0.715 ms > > > root@ubuntu /g/r/c/w/client# ping 10.100.1.1 > PING 10.100.1.1 (10.100.1.1) 56(84) bytes of data. > ^C > --- 10.100.1.1 ping statistics --- > 3 packets transmitted, 0 received, 100% packet loss, time 2033ms > > > What am I doing wrong? > > -- > VK > _______________________________________________ > WireGuard mailing list > WireGuard@lists.zx2c4.com > https://lists.zx2c4.com/mailman/listinfo/wireguard _______________________________________________ WireGuard mailing list WireGuard@lists.zx2c4.com https://lists.zx2c4.com/mailman/listinfo/wireguard