On Sun, Apr 15, 2018 at 6:26 PM, Jason A. Donenfeld <ja...@zx2c4.com> wrote:
> Hi Patrick,
>
> I see some others on the wireguard mailing list have replied to a
> ghost email. That is, I don't have the original that they're replying
> to. Looking into it a bit further, it appears that reasonable spam
> filters -- which includes but is not limited to gmail's -- will have
> your mail immediately bounced, because of your strict dmarc entry
> ("v=DMARC1; p=reject; rua=mailto:dm...@insaneirish.com";), since
> mailing list servers like lists.zx2c4.com tend to "remail" things. You
> might want to loosen these up a bit. Anyway, I've pulled it out of the
> archives for quoting here:

More recent versions of the 2.1 series of mailman have features to
wrap messages from senders using DMARC instead of just straight
remailing them to help address this issue.

>
>> Hi Folks,
>>
>> Getting my feet wet with wireguard and enjoying the simplicity and
>> performance thus far. Nonetheless, I have a question about how the
>> normal route selection process is being affected by what's configured
>> for 'allowed-ips'.
>>
>> I set up a peer and configured 'allowed-ips' for 0.0.0.0/0, as I was
>> going to be sending multiple routes over the peer link via BGP and
>> didn't want to keep modifying it. However, even though my default
>> route was over a different interface, this seemed to result in Linux
>> trying to route default traffic over wg0 despite there not being a
>> default route pointing to wg0.
>>
>> Specifically:
>>
>> $ sudo ip route show
>> default via 10.199.199.1 dev wlan0
>> 10.111.111.0/24 dev wg0 proto kernel scope link src 10.111.111.100
>> 10.199.199.0/24 dev wlan0 proto kernel scope link src 10.199.199.131
>>
>> By this route table, traffic to e.g. 4.2.2.1 should use 10.199.199.1.
>> Packet captures were showing traffic trying to instead use wg0. Then I
>> found this:
>>
>> $ sudo ip route get 4.2.2.1
>> 4.2.2.1 dev wg0 table 51820 src 10.111.111.100
>>     cache
>>
>> Can someone please explain this behavior?
>>
>> Obligatory... $ uname -rvm
>> 4.14.30-v7+ #1102 SMP Mon Mar 26 16:45:49 BST 2018 armv7l
>>
>> And... $ dpkg -l | grep wireguard
>> ii  wireguard                       0.0.20180413-1               all
>>        fast, modern, secure kernel VPN tunnel (metapackage)
>> ii  wireguard-dkms                  0.0.20180413-1               all
>>        fast, modern, secure kernel VPN tunnel (DKMS version)
>> ii  wireguard-tools                 0.0.20180413-1               armhf
>>        fast, modern, secure kernel VPN tunnel (userland utilities)
>
> Are you using wg-quick(8)? If so, wg-quick will by default do special
> things to sync up the allowed ips and the system routing table, which
> includes some special case rule tricks for 0.0.0.0/0. It sounds like
> you know what you're doing and don't actually want this behavior. For
> this, you can simply specify Table=off in the [Interface] section.
> This overrides the default value of Table=auto. Alternatively, you can
> choose Table=main if you want those routes added to the default table
> with no special rule tricks. Or, you can choose an arbitrary
> named-table or number if you'd like to add the allowed ips to some
> other routing table. The man page has info.
>
> Jason
> _______________________________________________
> WireGuard mailing list
> WireGuard@lists.zx2c4.com
> https://lists.zx2c4.com/mailman/listinfo/wireguard
_______________________________________________
WireGuard mailing list
WireGuard@lists.zx2c4.com
https://lists.zx2c4.com/mailman/listinfo/wireguard

Reply via email to