Hello Max,
thanks for your reply.
Could it be that some kind of firewall is restricting UDP traffic to your other
server?
Well, locally, I do use this machine as Host for many tunnels.
E.g. could you try to run `mtr --udp [other server's public IP address]` on
your computer (while disabling your other WireGuard connection, if applicable)
and report back whether there is any kind of packet loss?
I used traceroute on the commandline for this:
Remote_
wg-quick up wgnet0
[#] ip link add wgnet0 type wireguard
[#] wg setconf wgnet0 /dev/fd/63
[#] ip -4 address add 10.192.122.3/32 dev wgnet0
[#] ip link set mtu 1420 up dev wgnet0
[#] wg set wgnet0 fwmark 51820
[#] ip -4 route add 0.0.0.0/0 dev wgnet0 table 51820
[#] ip -4 rule add not fwmark 51820 table 51820
[#] ip -4 rule add table main suppress_prefixlength 0
root@openmediavault:/etc/wireguard# wg show
interface: wgnet0
public key: cebXSaxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxMFw=
private key: (hidden)
listening port: 42759
fwmark: 0xca6c
peer: oNjmmmmmmmmmmmmmmmmmmmmmmmmmmmmU=
endpoint: [2003:cb:97ff:33d8:9ec7:a6ff:fefd:3a6d]:51820
allowed ips: 0.0.0.0/0
transfer: 0 B received, 444 B sent
persistent keepalive: every 25 seconds
Local:
traceroute to 2a00:sdfs:sdfsdf:sdfs:erre:ereee:sdf:c33a
(2a00:sdfs:sdfsdf:sdfs:erre:ereee:sdf:c33a), 30 hops max, 80 byte
packets
1 p200300cb9733ca009ec7a6fffefd3a69.dip0.t-ipconnect.de
(2003:cb:9733:ca00:9ec7:a6ff:fefd:3a69) 0.946 ms 3.435 ms 3.645 ms
2 2003:0:8501::1 (2003:0:8501::1) 13.884 ms 13.839 ms 14.193 ms
3 * * *
4 2001:2000:3019:6b::1 (2001:2000:3019:6b::1) 86.609 ms 88.002 ms
87.874 ms
5 ddf-b2-v6.telia.net (2001:2000:3018:21::1) 88.137 ms 89.508 ms
89.639 ms
6 * * *
7 2a00:6020:0:b::2 (2a00:6020:0:b::2) 81.576 ms 81.989 ms
2a00:6020:0:a::2 (2a00:6020:0:a::2) 82.201 ms
8 lo1007.kr1.dc1-bor.dg-ao.de (2a00:6020:1000:3::1) 86.281 ms 84.259
ms 85.760 ms
9 2a00:xxxx:1000:3:yyyy:7f3d:d93e:f23d
(2a00:xxxx:1000:3:yyyy:7f3d:d93e:f23d) 88.483 ms !X 87.579 ms !X
88.447 ms !X
And here the mtr results (wg up and down)
https://1drv.ms/u/s!AvbzKdYzkh6gl0BVLcuR9eeWUaqj?e=9wKxSC
https://1drv.ms/u/s!AvbzKdYzkh6gl0HVwPz1FabOtemM?e=c7bCcB
If not, you may wish to check whether the port on the machine is reachable,
e.g. by running `nc -v -l -u -p 12345` on your server and then executing `echo
test | nc -u [server's IP] 12345`, to check whether the message arrives at the
server.
I am using the machine that is here, locally as server for many tunnels.
So, the wireguard port is reachable.
On the remote machine, I have NOT done any port forwarding. Is that
neccessary at all? I thought that only the machine that is NOT
initiating the connection needs a port forwarding.
Greetings,
Hendrik
Best,
Max
On 20/11/22 07:39pm, Hendrik Friedel wrote:
Hello,
(I posted this a while ago, but it never appeared on the list; if the list is
the wrong place for this question, please let me know; I would appreciate a
hint for a more appropriate place)
I am using wireguard to connect two machines.
My local server is connected to the internet via a router. I am using theis
Server also for connecting other devices (e.g. mobile phones) to my home
network. This works great.
But when connecting to another server (both debian 10), I only get a
successful connection, but no ping.
*My server:*
wg show
interface: wgnet0
public key: xxxxx=
private key: (hidden)
listening port: 51820
peer: sdfsdfsdfsdfsdfsdf=
endpoint: 109.41.64.83:15167
allowed ips: 10.192.122.2/32
latest handshake: 1 minute, 7 seconds ago
transfer: 10.95 MiB received, 40.35 MiB sent
peer: yyyy=
endpoint: 185.22.142.254:51380
allowed ips: 10.192.122.3/32
transfer: 0 B received, 5.20 KiB sent
peer: yyyy=
endpoint: 93.214.229.137:64119
allowed ips: 10.192.122.4/32
peer: yyyy=
endpoint: 93.214.225.116:49819
allowed ips: 10.192.122.5/32
peer: yyyy=
allowed ips: 10.192.122.6/32
peer: yyyy=
allowed ips: 10.192.122.7/32
more /etc/wireguard/wgnet0.conf
[Interface]
Address = 10.192.122.1/24
SaveConfig = true
PostUp = iptables -A FORWARD -i wgnet0 -j ACCEPT; iptables -A FORWARD -o
wgnet0 -j ACCEPT; iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
PostDown = iptables -D FORWARD -i wgnet0 -j ACCEPT; iptables -D FORWARD -o
wgnet0 -j ACCEPT; iptables -t nat -D POSTROUTING -o eth0 -j MASQUERADE
ListenPort = 51820
PrivateKey = aaa=
[Peer]
PublicKey = yyyy=
AllowedIPs = 10.192.122.2/32
Endpoint = 123.41.67.233:18314
[Peer]
PublicKey = xxx=
AllowedIPs = 10.192.122.3/32
Endpoint = 123.22.142.254:51380
ip route
default via 192.168.177.1 dev eth0 proto static
10.192.122.0/24 dev wgnet0 proto kernel scope link src 10.192.122.1
and the other side/server:
interface: wgnet0
public key: xxxxx=
private key: (hidden)
listening port: 54004
fwmark: 0xca6c
peer: yyyyy=
endpoint: [2003:cb:aaa:bbb:9ec7:a6ff:fefd:3a6d]:51820
allowed ips: 0.0.0.0/0
transfer: 0 B received, 2.75 KiB sent
persistent keepalive: every 25 seconds
more wgnet0.conf
[Interface]
Address = 10.192.122.3/32
PrivateKey = xxxxx=
[Peer]
PublicKey = yyyyy=
Endpoint = v.myfritz.net:51820
AllowedIPs = 0.0.0.0/0
PersistentKeepalive = 25
It seems to me, that the connection is successfully established , but data is
only transmitted in one direction.
How can I find the reason?
Regards,
Hendrik
