I probably should share some more details about my use case and also why I am hesitating to use OpenBSD/OpnSense etc. All my VPN-routers are actually virtual machines. One is a virtual private server from a hoster that provides an external static IPv4 address, the others are Ubuntu VMs running on Hyper-V 2019. When I check support of OpenBSD/OpnSense on Hyper-V it looks like this is not really granted, basically works, but... and CARP apparently requires special configuration and cooperation of network drivers. And then I haven´t found good documentation on how to configure CARP with wireguard.
Thus I tried something else... Until this week, the router of one network was on a mobile machine, which occasionally was really on the road - and the connectivity was of course broken then. There is another host available in the same network that can host a VM, but that host is not running 7*24 for power and noise reasons. That actually suggested a fail over scenario to me. What I configured right now is the following: I "partitioned" that network logically into two groups of VPN-clients. One group is the host and all VMs on the power-saving-host, the other group is the rest. Via DHCP or static routes, each group now uses different routers (part of the respective group) for their respective wireguard tunnel to the other networks. On the other side of the tunnel, network ranges in AllowedIPs are used to address the respective peer (I didn´t dare to have these overlap so far). That is not really a general high-availability scenario, as essentially I optimized for the expected outages. I am still wondering whether wireguard can support a more general approach without the complexity introduced by CARP. My gut feeling is that the roaming capabilities of wireguard should actually support that very well. Thanks, Joachim -----Ursprüngliche Nachricht----- Von: WireGuard <[email protected]> Im Auftrag von Nicolai Gesendet: Tuesday, 2 March 2021 18:10 An: [email protected] Betreff: Re: best way for redundancy? On Thu, Feb 25, 2021 at 10:17:06PM +0100, Joachim Lindenberg wrote: > I do have a wireguard VPN that connects multiple sites. Unfortunately > some routers are not available all the time, causing network disruption. > I'd like to improve connectivity via redundancy, i.e. add multiple > routers that connect the networks. > What are the options to do that using wireguard? Can I have multiple > peers with different keys and endpoint but same Allowed IPs? Will > wireguard select the one available? In the future I want a similar setup: multiple routers for each network each seamlessly handling WireGuard when necessary. I haven't put any effort into this yet, but my general plan is to use CARP on OpenBSD, with WireGuard sharing keys. (I know you want distinct keys, so I waited to respond until others had a chance.) Anyway the routers in City1 would share City1Keys, routers in City2 would share City2Keys, etc. When City1Router1 is unavailable, City1Router2 would grab the IP address and be able to immediately speak WireGuard to the other locations without anyone noticing. https://www.openbsd.org/faq/pf/carp.html Nicolai
