yeah, i have the same problem. i gather your 'wg set' command didn't used to hang, mine took effect on 0.3.9 but i always had to run it manually and Ctrl-C it as it would never return.
On Mon, 12 Apr 2021 at 08:57, Peter Whisker <[email protected]> wrote: > > It seems to be your suggested workaround for using Wireguard via a split > tunnel: > > PostUp = wg set %WIREGUARD_TUNNEL_NAME% listen-port 0 > > which is causing the crash. It was great that this worked in earlier > versions but I'm now back to square one. > > Peter > > On 12/04/2021 08:45, Peter Whisker wrote: > > Hi > > > > Since the recent upgrade to 0.3.10 It now crashes bringing up my > > tunnels - all was well with 0.3.9. > > > > Peter > > > > 2021-04-12 08:41:07.187: [TUN] [lhirisseccom01] Setting interface > > configuration > > 2021-04-12 08:41:07.187: [TUN] [lhirisseccom01] Routine: event worker > > - started > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] UAPI: Updating private > > key > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] UAPI: Removing all peers > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > UAPI: Created > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > UAPI: Updating preshared key > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > UAPI: Updating endpoint > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > UAPI: Updating persistent keepalive interval > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > UAPI: Removing all allowedips > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > UAPI: Adding allowedip > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > UAPI: Adding allowedip > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > UAPI: Adding allowedip > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > UAPI: Adding allowedip > > 2021-04-12 08:41:07.188: [TUN] [lhirisseccom01] Bringing peers up > > 2021-04-12 08:41:07.190: [TUN] [lhirisseccom01] UDP bind has been updated > > 2021-04-12 08:41:07.190: [TUN] [lhirisseccom01] Routine: receive > > incoming 0x292980 - started > > 2021-04-12 08:41:07.190: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > Starting... > > 2021-04-12 08:41:07.190: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > Sending keepalive packet > > 2021-04-12 08:41:07.190: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > Sending handshake initiation > > 2021-04-12 08:41:07.190: [TUN] [lhirisseccom01] Routine: receive > > incoming 0x292a60 - started > > 2021-04-12 08:41:07.190: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > Routine: sequential sender - started > > 2021-04-12 08:41:07.190: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > Routine: sequential receiver - started > > 2021-04-12 08:41:07.190: [TUN] [lhirisseccom01] Interface state was > > Down, requested Up, now Up > > 2021-04-12 08:41:07.191: [TUN] [lhirisseccom01] Monitoring default v6 > > routes > > 2021-04-12 08:41:07.191: [TUN] [lhirisseccom01] Binding v6 socket to > > interface 0 (blackhole=false) > > 2021-04-12 08:41:07.191: [TUN] [lhirisseccom01] Setting device v6 > > addresses > > 2021-04-12 08:41:07.202: [TUN] [lhirisseccom01] Monitoring default v4 > > routes > > 2021-04-12 08:41:07.210: [TUN] [lhirisseccom01] Binding v4 socket to > > interface 10 (blackhole=false) > > 2021-04-12 08:41:07.212: [TUN] [lhirisseccom01] Setting device v4 > > addresses > > 2021-04-12 08:41:07.212: [TUN] [lhirisseccom01] Listening for UAPI > > requests > > 2021-04-12 08:41:07.212: [TUN] [lhirisseccom01] Executing: `wg set > > %WIREGUARD_TUNNEL_NAME% listen-port 0` > > 2021-04-12 08:41:07.229: [TUN] [lhirisseccom01] peer(Qfjl…0V1w) - > > Received handshake response > > 2021-04-12 08:41:07.404: [TUN] [lhirisseccom01] UAPI: Updating listen > > port > > 2021-04-12 08:41:07.404: [TUN] [lhirisseccom01] Routine: receive > > incoming 0x292980 - stopped > > 2021-04-12 08:41:07.404: [TUN] [lhirisseccom01] Routine: receive > > incoming 0x292a60 - stopped > > 2021-04-12 08:41:07.407: [TUN] [lhirisseccom01] cmd> Unable to modify > > interface: Unknown error > > 2021-04-12 08:41:07.410: [TUN] panic: ring is full > > 2021-04-12 08:41:07.410: [TUN] goroutine 134 [running]: > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/wireguard/conn.(*ringBuffer).Push(...) > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/[email protected]/conn/bind_windows.go:46 > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/wireguard/conn.(*afWinRingBind).InsertReceiveRequest(0xc000220000, > > 0x0, 0x0) > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/[email protected]/conn/bind_windows.go:327 > > +0x7e > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/wireguard/conn.(*WinRingBind).Open(0xc000220000, 0x0, > > 0x0, 0x0, 0x0, 0xc00021dbf7, 0x0, 0x0) > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/[email protected]/conn/bind_windows.go:291 > > +0x265 > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/wireguard/device.(*Device).BindUpdate(0xc000222000, > > 0x0, 0x0) > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/[email protected]/device/device.go:470 > > +0x104 > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/wireguard/device.(*Device).handleDeviceLine(0xc000222000, > > 0xc000324030, 0xb, 0xc00032403c, 0x1, 0x1, 0xc0003140a0) > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/[email protected]/device/uapi.go:223 > > +0x7a5 > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/wireguard/device.(*Device).IpcSetOperation(0xc000222000, > > 0x52ee60, 0xc0003042a0, 0x0, 0x0) > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/[email protected]/device/uapi.go:183 > > +0x279 > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/wireguard/device.(*Device).IpcHandle(0xc000222000, > > 0x537840, 0xc0004b4078) > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/[email protected]/device/uapi.go:426 > > +0x165 > > 2021-04-12 08:41:07.410: [TUN] created by > > golang.zx2c4.com/wireguard/windows/tunnel.(*tunnelService).Execute.func2 > > 2021-04-12 08:41:07.410: [TUN] > > golang.zx2c4.com/wireguard/windows/tunnel/service.go:226 +0x7b > > 2021-04-12 08:41:07.467: [MGR] [lhirisseccom01] Tunnel service tracker > > finished > > 2021-04-12 08:41:16.327: [MGR] [Wintun] IsPoolMember: Reading pool > > devpkey failed, falling back: Element not found. (Code 0x00000490) > > 2021-04-12 08:41:16.338: [MGR] Removing Wintun interface > > ‘lhirisseccom01’ because no service for it exists > > > > On 09/04/2021 23:47, Jason A. Donenfeld wrote: > >> The fix has been released in 0.3.10. > >> > >> Jason
