The macOS version is 11.4 (20F71). I also found that when the client config contains two peers, one of them just doesn't work.
zhengmian hu <[email protected]> 于2021年7月8日周四 上午12:52写道： > > I expect no data to be sent to the server when I only visit the local > address. However, this is not true for wireguard on macOS. > > Detailed setup: > App: > Downloaded from app store. App version: 1.0.13 (24), Go backend > version: f9b48a96. > > Server: > ``` > [Interface] > Address = 10.110.210.1/24 > SaveConfig = true > ListenPort = 51820 > PrivateKey = xxxxSERVER_PRIVATExxxx > > [Peer] > PublicKey = xxxxCLIENT_PUBLICxxxx > AllowedIPs = 10.110.210.7/32 > Endpoint = xxxx > ``` > > Client: > ``` > [Interface] > PrivateKey = xxxxCLIENT_PRIVATExxxx > Address = 10.110.210.7/32 > > [Peer] > PublicKey = xxxxSERVER_PUBLICxxxx > AllowedIPs = 10.110.210.1/24 > Endpoint = xxxSERVER_IPxxx:51820 > PersistentKeepalive = 25 > ``` > > Test: > ``` > ❯ traceroute 10.110.210.7 > traceroute to 10.110.210.7 (10.110.210.7), 64 hops max, 52 byte packets > 1 10.110.210.1 (10.110.210.1) 22.118 ms 19.846 ms 19.929 ms > 2 10.110.210.7 (10.110.210.7) 40.627 ms 40.264 ms 43.752 ms > ``` > > Route: > ``` > ❯ netstat -rn -f inet > Routing tables > > Internet: > Destination Gateway Flags Netif Expire > default 192.168.0.1 UGScg en0 > default link#17 UCSIg utun2 > 10.110.210/24 link#17 UCS utun2 > 10.110.210.7 10.110.210.7 UH utun2 > 127 127.0.0.1 UCS lo0 > 127.0.0.1 127.0.0.1 UH lo0 > ... > 255.255.255.255/32 link#17 UCSI utun2 > ``` > > Expected behaviour: > When using `traceroute 10.110.210.7`, the server `10.110.210.1` doesn't show > up. > > Other: > I have tried the same configuration on Windows, and it works fine.
