Steve, We are using a combination of the Cisco POE Switches (WS-C3750-48P), Cisco POE Blades (WS-X4548-GB-RJ45V), and the PowerDSine MidSpans (6006, 6012) (http://www.powerdsine.com/Products/Midspan/) The 3750 is used where we need 12 or more powered ports and were currently using the 3750 stack, the 4548 was used when we had a 4506 installed and needed power, and the PowerDSine was used when we needed less than 12 powered ports. We have had no issues with any of these units and would recommend them all, based on the individual usages.
Chip Greene Network Specialist University of Richmond -----Original Message----- From: Steve Fletty [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 08, 2006 10:45 AM To: [email protected] Subject: [WIRELESS-LAN] Midspand PoE? What are people doing for PoE? Any midspan switch recommendations? -- Steve Fletty Network Engineer Networking and Telecommunications University of Minnesota [EMAIL PROTECTED] ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
