Some thoughts:
1. Make sure you have the correct staion role set on each bridge ("root
bridge" connects to LAN, "repeater" or "work group bridge" is at the
remote end)
2. Make sure that you are not running multiple vlans on the repeater.
repeaters cannot have multiple vlans set.
3. Make sure infra-ssid is in same case on each 1300 (Cisco says SSIDs
are case sensitive)
4. Enures that CCX extensions are turned on on each
Not sure if any of this will help but it is a start.
Mike
***************************************************************
Michael Dickson Phone: 413-545-9639
Network Analyst [EMAIL PROTECTED]
University of Massachusetts
Network Systems and Services
***************************************************************
Ranjit Philip wrote:
We are trying to get a Point-to-Point setup going with Aironet 1300
thick AP's.
The root bridge AP shows the following log entry for the non-root
bridge AP: Station xxxx.xxxx.xxxx Authentication failed
What could be the reason for this. The radio MAC Addresses of both
the root and non-root are in each others Local MAC Address list.
They are set to use the same channel and the Infrastructure SSID is
set with the same variable.
Any help would be greatly appreciated...
Thank you, Ranjit
********** Participation and subscription information for this
EDUCAUSE Constituent Group discussion list can be found at
http://www.educause.edu/groups/.
********** Participation and subscription information for this
EDUCAUSE Constituent Group discussion list can be found at
http://www.educause.edu/groups/.
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at http://www.educause.edu/groups/.
