RE: [WIRELESS-LAN] Cisco LWAPP

[King, Michael]

Title: Re: [WIRELESS-LAN] Cisco LWAPP

Actually, that's a little misleading.   Newer versions of WCS with older WISM code is OK. (Not the best, but OK)   Newer versions of WISM, with older WCS is NOT OK. (WCS asks a question, WISM gives a response WCS is not prepared to answer)     From: Roth, Joe [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 20, 2006 1:24 PM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] Cisco LWAPP We actually installed 4.0 on a new box and just pulled the configs off of the controllers again without any problems. But we were told by Cisco that you should not run a newer ver of WCS with an older ver of the WiSM code, or vice versa.       From: BennettJ [mailto:[EMAIL PROTECTED] Sent: Wednesday, September 20, 2006 12:51 PM To: WIRELESS-LAN@LISTSERV.EDUCAUSE.EDU Subject: Re: [WIRELESS-LAN] Cisco LWAPP   Joe, Did you have any problems upgrading the controllers or WCS from version 3.0.x.x to the 4.0.66.0 version of WCS. While upgrading a controller from 3.0.x.x to a 4.0.x.x I found that not all the settings were saved. Several previously made interfaces (but not all) as well as a few Wlans were missing from the config. It was easy enough to consult the backup configs to replace these settings but I felt like this loss of configuration should not have happened. Has anyone else had a similar experience? -Jim Jim Bennett Sr. Network Engineer College of Charleston ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.