We use Verisign and Cisco ACS on LWAPP. After the server names are listed in the supplicant config and are trusted once, we never see the cert prompt again.
(Also- make sure PC date/time is correct- if the PC clock time is way off, outside of the valid cert time period, the client will never get past the "verify cert" bubbles- this one can be maddening to diagnose). -Lee Lee H. Badman Wireless/Network Engineer Information Technology and Services Syracuse University 315 443-3003 -----Original Message----- From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[EMAIL PROTECTED] On Behalf Of Norman Elton Sent: Wednesday, November 19, 2008 9:37 AM To: [email protected] Subject: Re: [WIRELESS-LAN] WPA and Wireless LAN Server Certificate? We're using a Verisign cert on IAS, but our users are still prompted to accept the cert upon initial connect. We asked Verisign about this, and they basically said, "that's the way it's designed to work". We did some poking around on the interwebs, and could find a good solution. This was two or three years ago. Has anyone managed to find a cert that XP/Vista will accept without prompting? Thanks Norman Elton ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
