Hi Lee,
Given that we are running 802.1x PEAP w/ MS-CHAPv2, WPA/TKIP on main prod wireless network, has anyone with same network setup found a wireless printer that will work as a client device? Looking for real examples of functional printers- several wireless printers look potentially good until you go to set them up. If you know of any the work in the real world (with 802.1x PEAP w/ MS-CHAPv2, WPA/TKIP) the information would have great value.
Only negative information i'm afraid. Last time I checked the HP JetDirect supplicant was running something that claimed to be PEAPv0 (had the PEAPv0 flag), but acted more like PEAPv1 (including full EAP headers in the inner tunnel). Our RADIUS servers (FreeRADIUS 2.*) categorically refused to authenticate these devices (because of the additional headers in the inner tunnel), and i've heard reports that IAS rejects them as well.
This was on wired, but the supplicant is probably the same for both wired and wireless interfaces (it'd make no sense implementing EAP twice). Regards, Arran -- Arran Cudbard-Bell ([email protected]), Authentication, Authorisation and Accounting Officer, Infrastructure Services (IT Services), E1-1-08, Engineering 1, University Of Sussex, Brighton, BN1 9QT DDI+FAX: +44 1273 873900 | INT: 3900 GPG: 86FF A285 1AA1 EE40 D228 7C2E 71A9 25BB 1E68 54A2 ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
