Hector,
We have run into this problem as well. Looking in the dhcp logs, the
dhcp server hears the discover and makes an offer. Debug from the
controller shows the offer going out, but no request from the client.
We can reboot the AP and the client will start working. My next step
is to run AirMagnet and find out what's going on between the AP and
the client. I will reserve judgement until then.
James Nesbitt
Duke University
On Aug 27, 2009, at 4:58 PM, Hector J Rios wrote:
Have you guys run into this issue? We run Cisco’s lightweight APs on
WiSMs running code 5.2.193. Mac will associate to our APs but just
won’t obtain an IP address. In the end it assigns itself a self-
assigned IP. We are seeing this on a lot of new MacBooks and
MacBookPros running 10.5.8. If we associate the computer to an
autonomous AP it works fine. If we boot it in safe mode it works
fine too. Everything else it just fails.
Thanks,
Hector Rios
Louisiana State University
********** Participation and subscription information for this
EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/
.
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at http://www.educause.edu/groups/.
