You could enable multicast on the controller only. Generally, APs in the same building should reside on the same controller. This would allow the devices to discover each other via MDNS port 5353. Once the discovery takes place all other traffic is unicast TCP.
James Nesbitt Networking Specialist Communication Technologies North Carolina State University [email protected] (919)515-0137 >>> Ken Connell 10/10/11 5:01 PM >>> I can see only two other options... 1. You get or force , if possible, both devices on the same vlan/network broadcast domain. 2. Setup an adhoc network for the task. Ken Connell Intermediate Network Engineer Computer & Communication Services Ryerson University 350 Victoria St RM AB50 Toronto, Ont M5B 2K3 416-979-5000 x6709 -----Original Message----- From: Scott Powell Sender: The EDUCAUSE Wireless Issues Constituent Group Listserv Date: Mon, 10 Oct 2011 15:03:34 To: Reply-to: The EDUCAUSE Wireless Issues Constituent Group Listserv Subject: [WIRELESS-LAN] KeyNote Remote on Cisco LWAPP I have a professor trying to use their iPod to remotely control their iPad in the classroom. It works fine on a test Netgear wireless router I have for testing. However it does not work on any of the WLANs I have configured for campus use. Doing a little research, it appears that this application requires multicast to be enabled? I currently do not have multicast enabled. Does anyone have experience with this? Any solutions that don't require enabling multicast? Thank you. Scott Powell Director, IT Infrastructure & Support Wittenberg University 937-525-3821 937-327-7372 fax www.wittenberg.edu ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
