With all respect, these features of 802.11ac will hardly be used in an enterprise / campus high-density AP deployment imho. See http://www.theruckusroom.net/2012/01/80211ac-boosts-buzz-more-than-bandwidth.html for a realistic view about 802.11ac. There are other features which be much more relevant for campus / enterprise wifi.
Kees >>> Jeffrey Sessler <[email protected]> 2/9/2012 1:01 >>> It's future-proofing for those dreaming of a fleet of 802.11ac AP's - You know, a few 8-antenna, 8 spatial stream, 160MHz wide channel monsters! ;) Jeff >>> On Tuesday, February 07, 2012 at 9:34 PM, in message <[email protected]>, Frank Bulk <[email protected]> wrote: And so who was pushing the old 10 Gbps limit pm the WiSM2? ;) Frank From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Robertson, Joshua A. Sent: Tuesday, February 07, 2012 9:38 AM To: [email protected] Subject: Re: [WIRELESS-LAN] New Cisco WLC Release 7.2.103.0 I especially like the upgrade of throughput on the WiSM2 to 20 Gbps and the ability to manage the RF profile by AP Group (something I’ve wanted for a long time). Also the finer tuning of rogue detection will be a welcome addition. Now to get the rest of my WiSMs upgraded to WiSM2s so I can actually run this… Josh Robertson Network Systems Senior Engineer Old Dominion University Office of Computing & Communications Services (757)683-5046 [email protected] http://occs.odu.edu/ From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Mike King Sent: Tuesday, February 07, 2012 9:46 AM To: [email protected] Subject: [WIRELESS-LAN] New Cisco WLC Release 7.2.103.0 http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn7_2.html#wp784178 Brief Overview: Wism2 limits double (1000Aps per controller) IPV6 dual stack support FlexConnect Rebranding Starting this release, the Hybrid REAPs (Hybrid Remote Edge Access Points) are referred to as FlexConnect Access Points. Rogue Enhancements You can now configure a minimum RSSI value for rogue APs, configure rogue reporting intervals, configure transient rogue interval to ignore transient rogue APs, and prevent tracking friendly rogues. This feature includes advanced controls for rogue monitoring, detection, and management There's alot more, I just didn't feel like copying the whole document into my email. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. Spam Not spam Forget previous vote ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. --------------------------------------------------------------------------- Op deze e-mail zijn de volgende voorwaarden van toepassing: The following conditions apply to this e-mail: http://emaildisclaimer.avans.nl --------------------------------------------------------------------------- ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
