Other than situations that absolutely have to have mesh we cover the majority of our outdoor spaces using indoor AP's and external antennas. We treat outdoor areas around a building as part of the building during design. That we can account for backlobes and adjust the directional antennas do that interference is minimal in other buildings! So far, so good!
Rick Brown NC State University Sent from my iPhone On Jul 2, 2012, at 3:47 PM, Ethan Sommer <[email protected]> wrote: > We are again considering deploying wireless outside, but we feel like we keep > running up against inherent contradictions that we don't know how to solve. > > Here are the expected "problems" we anticipate" > 1. If we put high powered APs outside, then they will cause interference with > APs inside, and indoor clients might try to connect to them because they seem > "stronger" even though they'd have a better connection to the indoor APs. > > a. How do you deal with the interference problems between high powered > outdoor APs and indoor APs? > b. Do you use the same SSIDs indoors and outdoors, and if yes, do indoor > clients connect to the outdoor APs? > c. If you have a seperate "outdoor" SSID, to client wireless network priority > lists ever cause indoor clients to connect to the outdoor network? > > 2. We currently use one VLAN per building, all on the same SSID. Clients > outside might hop between APs that are on different buildings, but not > re-request a new DHCP lease. > > a. What VLAN should we put the APs that are targeting outdoors on? If we have > a dedicate "outdoor" VLAN, I suppose we can give it its own subnet, but if we > don't have a seperate SSID... we are not sure what to do. > b. If we target antennas outside of a building, it might be pointing at > another building, thus causing clients in the other building to connect to > the wrong vlan. Right? > > 3. When we last tried to implement outdoor wireless (using 802.11b tropos > APs) wireless clients would often be mobile, but not decide to switch to a > new AP when they had lost the signal to the old one. > > a. Do you actively force clients to reassociate to a stronger AP somehow? > b. Are clients better at that now? > c. Do you have a support statement which specifies whether you try to make > that work? eg "We try to make wireless work if you open your laptop and are > stationary. If you move without your laptop sleeping, you're gonna have a bad > time." > > Thanks for any advice, > > Ethan > > -- > Ethan Sommer > Associate Director of Core Services > Gustavus Technology Services > 507-933-7042 > > ********** > Participation and subscription information for this EDUCAUSE Constituent > Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
