Hi Don,
No TKIP enabled, I think it would be safe to give it a try and see if
the messages went away. :-)
# config wlan security tkip hold-down 0 the_wlan_ID
# show wlan the_wlan_ID
old Tkip MIC Countermeasure Hold-down Timer....... 60
new Tkip MIC Countermeasure Hold-down Timer....... 0
Specifies the length of the TKIP holdtime in seconds (if the holdtime is
0, TKIP MIC failure hold is disabled)
best!
jim
On 3/5/2013 10:01 AM, Sullivan, Don wrote:
Concerning this error - " The AP '??' received a WPA MIC error on protocol '0' from
Station '68:a8:6d:3c:63:dc'. Counter measures have been activated and traffic has been
suspended for 60 seconds." - Whats the general take about disabling the Client
Exclusion feature in WCS? I do not have TKIP enabled on our WLANs and my reading on this
feature seems to indicate it has to do with TKIP. Thanks for the feedback
Don Sullivan
Network Administrator | Office: 205.726.2111 | email: [email protected]
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at http://www.educause.edu/groups/.
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at http://www.educause.edu/groups/.
