Thought I'd ask if anyone else thinks AP groups and FlexC groups overlap a bit and would be less apt to cause confusion if combined under a single feature/screen.
I'm using both each in limited fashion to group configure the same set of APs. AP Group: to set allowed WLANs, and set RF profiles Flex Group: to set WLAN/vlan mappings so as not to have to touch every AP. The GUI interface contains a note in the AP group section stating: "Changing the WLAN interface mapping in an AP Group will remove the local VLAN mapping for FlexConnect AP in this group." That seems ripe for misconfiguration although I actually cannot replicate that as the FlexC mapping seems to hold no matter how I set the APGroup interface mapping. They do cover different properties but perhaps I'm missing something significant as to why they are split like this and within different areas of the GUI. -- Garry Peirce Network Architect Networkmaine, University of Maine System 1-207-561-3539 ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
