Our wireless setup is a single 7510 controller. I'm dealing with an issue where the Cisco 7925G wireless phone deployment guide recommends a 400 ms EAPOL-Key timeout (what we are using and phones work fine), but our Motorola/Symbol MC9000 series scanners seem to need more like 2000 ms to prevent issues (based on research, not actual testing). Our voice network is WPA2-PSK and the scanner network is WPA-PSK.
The problem is that the EAPOL-Key timeout is a global setting on the controller affecting all WLANs. I plan to change the timeout to 2000ms this week and see what happens, but I wanted to see if anyone else has dealt with this and has any thoughts (like the phones will break if I change to 2000 ms). Thank you, Nathan Hay Network Engineer | NOC WinWholesale Inc. 888-225-5947 ********************************************************************************************* This email message and any attachments is for use only by the named addressee(s) and may contain confidential, privileged and/or proprietary information. If you have received this message in error, please immediately notify the sender and delete and destroy the message and all copies. All unauthorized direct or indirect use or disclosure of this message is strictly prohibited. No right to confidentiality or privilege is waived or lost by any error in transmission. ********************************************************************************************* ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
