A while back we picked up a bunch of Apple TVs. The behavior I am seeing, according to my Ruckus controller is:
* Good wireless connection on all 5ghz when set to 20mhz. * Bad connection on 5ghz when using 40 mhz. In either case there is some pausing, freezing etc. sometimes worse than others. Then I read this: "You'll notice that antenna 2 on the Apple TV 3 only gets used (at least for transmit) on the 5.2 GHz band - channels 36 to 48." From here: http://www.anandtech.com/show/5687/apple-tv-3-2012-mini-review/3 . I have yet to test the performance, but when I switch the APs to a channel between 36 and 48 at 40mhz, the signal to the AP doubles in quality. Any thoughts would be appreciated Bob Williamson Network Administrator Annie Wright Schools | 827 N Tacoma Ave, Tacoma, WA 98403 | www.aw.org<http://www.aw.org/> D: 253.272.2216 | F: 253.572.3616 | [email protected]<mailto:[email protected]> ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
