Gonzalo, Meru SD 6.1-0-3 is affected by the Heartbleed bug. Please upgrade only to 6.1-1-23 or higher which is available by request. 6.1-1-23 also contains combined AP images for support for legacy AP311s which AP 6.1-0-3 does not have. So, I would advise against 6.1-0-3. We were using 5.3-x builds before upgrading to 6.1-1-23, so be sure you get clarification from your local SE (or tech support) to find out if you need to upgrade to 5.3-x before arriving at 6.1-x-x. The 6.1-0-3 Release notes, page 8, indicate that you should be OK going directly from 5.1-x to 6.1-x-x, but please double check.
Additionally, version 6.x is not supported on legacy controllers. (MC4100 for example) So be sure you are running current model controllers. (3200,4200, 5000, 6000 etc) If you use EzRF for reporting and other features, you will need to upgrade that server as well. Hope that helps, Josh @ KU Josh Heller Sr. Network Analyst Office of Information Technology Kutztown University 610.683.4930 From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Lee H Badman Sent: Thursday, April 24, 2014 12:39 PM To: [email protected] Subject: Re: [WIRELESS-LAN] Meru upgrade to SD 6.1 Dialogue around any vendor’s stuff is helpful and interesting, please don’t feel compelled to go off-list unless you get indo NDA/sensitive topics. ☺ -Lee Badman From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Gonzalo Cervantes Sent: Thursday, April 24, 2014 12:33 PM To: [email protected]<mailto:[email protected]> Subject: [WIRELESS-LAN] Meru upgrade to SD 6.1 Hi All, Reaching out to all the Meru folks in the group. Meru is encouraging us to upgrade to the "Go-To-Release" code SD 6.1-0-3. We are on SD 5.1-82 with a large deployment of AP 311 and AP320 (about 600 in total). The current code has been the most stable of the all the codes we've had but it's been two years since an upgrade. There are no must have enhancements in the code that will help our operation but there are other features like device fingerprinting and a spectrum manager tool that would be nice to have. My questions... Has anyone currently upgraded to SD 6.1 with AP311 and AP320 in their environment and what has been your experience with it? What was your upgrade process? Did you have to go through an upgrade path to get to 6.1? Any testing? I know the group may not be Meru heavy so we can take this off-list to cut down on the chatter. Thank you all in advance. Thanks, Gonzalo --- Gonzalo Cervantes Associate Director Network Services Barnard College, Columbia University [email protected]<mailto:[email protected]> 212-854-8795 barnard.edu/bcit<http://barnard.edu/bcit> ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
