This was a known bug is 7.4 MR 1 that was 'fixed' in 7.4 MR 2, but perhaps it still applies today in the 7.6 train? I haven't spent any time using the CCO bug tool to find out, sorry.
Bug ID: CSCug53945 Here are the 7.4 MR 1 release notes: http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn74mr01.html --- Greg Koprowski From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Sullivan, Ryan Sent: Monday, April 28, 2014 11:23 AM To: [email protected] Subject: Re: [WIRELESS-LAN] Disabled 2.4 Radios not staying disabled We are running 7.4.100.0 and see the same thing. Quite frustrating. Ryan Sullivan Datacom, ACT, UCSD 858-822-5602 ________________________________ From: The EDUCAUSE Wireless Issues Constituent Group Listserv [[email protected]] on behalf of Mike Albano [[email protected]] Sent: Friday, April 25, 2014 5:49 PM To: [email protected]<mailto:[email protected]> Subject: [WIRELESS-LAN] Disabled 2.4 Radios not staying disabled Anyone else seeing this? Cisco Wism2's ver. 7.6.100.10 (though I believe it affects all 7.6) When I disable radios "config 802.11b disable <ap_name>" the radios turn themselves back on after a "config ap reset" or power outage, changing AP Group's etc. Basically, when the AP reboots, the radio re-enables itself. TAC case pending. Mike Albano ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
