Lee, We have AVC working in PI 2.2.0 - our source is netflow from 2 x ASR-1006 edge Routers only. I spent a lot time trying to get it to work from SUP2T to no avail. We are using Aruba controllers and airwave on our wireless side for this function.
Chad From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Lee H Badman Sent: Tuesday, September 01, 2015 2:03 PM To: [email protected] Subject: [WIRELESS-LAN] Cisco AVC reporting in PI 2.2 As I just shared with our SE... After going to PI 2.2, we lost the ability to see AVC information in PI. It was easy to setup in 1.4 after getting the assurance licenses we needed using this: http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/115756-avc-guide-00.html And then there is this for PI 3 http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/solution_overview_c22-728972.html#_Toc428598044 But I can find nothing on 2.2 and the PI interface maps to neither the old or new. Any idea where I can find guidance on application reporting setup in 2.2 PI? I had no idea this was gone until I needed it, and I'm finding nothing after hours of searching. Anyone else been down this road? I have it set fine on the WLCs, just PI is typically confounding. (yes I know 3.0 is out) Thanks- Lee Lee Badman | Network Architect Information Technology Services 206 Machinery Hall 120 Smith Drive Syracuse, New York 13244 t 315.443.3003 f 315.443.4325 e [email protected]<mailto:[email protected]> w its.syr.edu SYRACUSE UNIVERSITY syr.edu ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
