I've been using these
<http://www.homedepot.com/p/Unbranded-9-1-in-x-5-8-in-White-Designer-Shelf-Bracket-EB-0036-WT/204611772>
shelf brackets with some modification. I use self-tapping screws
carefully placed, and they are two piece, so the plastic piece comes off
revealing a channeled bracket. I am using a stepped hole saw and passing
the cable through the bracket straight into the channel. A tiny mod to
the plastic cover where it overlaps the AP and you can barely spot the
patch.
I can post a picture of one next week.
http://www.homedepot.com/p/Unbranded-9-1-in-x-5-8-in-White-Designer-Shelf-Bracket-EB-0036-WT/204611772
On 9/11/2015 3:03 PM, Dan Brisson wrote:
I'm wondering if anyone out there can recommend a horizontal mounting
bracket for Cisco APs. Ventev TerraWave has a new model out and
Oberon has had them for a while. The TerraWave model looks good but
comes in at around $100, which is bit pricy for me.
The ideal bracket would be able to be screwed to a standard single
gang electrical box.
Anybody have any other recommendations?
Thanks,
-dan
--
*Jason Watts* | Senior Network Administrator
*H1*
*PRATT INSTITUTE*
<mailto:[email protected]>
**********
Participation and subscription information for this EDUCAUSE Constituent Group
discussion list can be found at http://www.educause.edu/groups/.
