Thanks for the comments. I worked with Cisco yesterday. We are trying to move L3 to buildings and it was not setup properly so we were dropping pings. This was causing connectivity problems with WISM2s.
From: The EDUCAUSE Wireless Issues Constituent Group Listserv [mailto:[email protected]] On Behalf Of Kevin McCormick Sent: Thursday, April 14, 2016 6:01 PM To: [email protected] Subject: Re: [WIRELESS-LAN] WAPs Bounce on vlan 765 If you have old APs can can't jump to 8.1 or 8.2, I would recommend 8.0.132.0. There have been a ton of bug fixes since the release you are currently on. As for APs associating and disassociating, are there any issues with IPs being reused or overlapping on the new vlan? Kevin McCormick Western Illinois University On 4/14/2016 10:39 AM, Legge, Jeffry wrote: I have all my Aps on vlan 665. I am trying to put some on vlan 765. When I do they repeatedly associated and dis-associate. I am working with Cisco TAC but so far they cannot explain why this is happening. Ha anyone experienced this before. Any suggestions I have two WISM2s on 7.6.122.12. I plan on upgrading to 8.x in May. Jeff Legge Radford University ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
