A local Aruba vendor has made some custom 2-gang cover plates modified with a tile grid type piece for another Campus. Just mount the adapter plate and clip the AP similar to a ceiling grid. It was custom piece at a "decent" price, but can't recall exactly. I've used various Oberon products and they're really nice. We have some older bldgs with plenum ceiling that use a steel frame grid with integrated supply ducts. No standard grid for clip usage. I've used the Aruba AP-220-MNT-W1 and Aruba AP-220-MNT-W2 using screws and zip ties. If the W2 is too costly, a cheaper options we entertained was to modify the included grid clip adapter and screw it into the steel plate. The latter solution was really difficult to remove so we didn't use it.
For walls, I prefer this solution until I find something better. #1011-00 http://www.oberoninc.com/products/right-angle-brackets I contacted Oberon's competitor and their similar model didn't have a knockout for cable pass-through and had some differences. This was shortly after Atmosphere. Wasn't worth the cost when we had to modify to make it work. Lionel On Fri, Aug 26, 2016 at 9:17 AM, John Kristoff <[email protected]> wrote: > Has anyone found, purchased or produced wall mounting kits suitable for > attaching an AP to a gang box. Specifically for Aruba APs like the 325 > (or the 220). We've found the AP-220-MNT-W2, but if you get a lot of them, > it gets costly quick. > > Thank you, > > John > > ********** > Participation and subscription information for this EDUCAUSE Constituent > Group discussion list can be found at http://www.educause.edu/groups/. > ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
