Lee, We had a similar issue but it was not with the 8540’s but instead a pair of WISM2’s. Our issue was actually determined to be a bug with a 40 gig line card also in the same 6500 chassis the wism2’s were in. We are in the process of turning up a pair of 8540’s. What code version is TAC recommending now? We were advised to steer clear of 8.3 for the moment. Curious as to what they are telling you.
Thanks, Kelly Slone On Aug 31, 2016, at 9:37 PM, Lee H Badman <[email protected]<mailto:[email protected]>> wrote: And- we have a code bug! Who would have thought? Emergency upgrade time... seems like once a semester minimally, we trade one set of bugs for a newer, more exciting set. Grrr. Lee Badman | Network Architect (CWDP, CWNA, CWSP, Mobility+) Information Technology Services 206 Machinery Hall 120 Smith Drive Syracuse, New York 13244 t 315.443.3003 f 315.443.4325 e [email protected]<mailto:[email protected]> w its.syr.edu<http://its.syr.edu/> SYRACUSE UNIVERSITY syr.edu<http://syr.edu/> ________________________________ From: The EDUCAUSE Wireless Issues Constituent Group Listserv <[email protected]<mailto:[email protected]>> on behalf of Lee H Badman <[email protected]<mailto:[email protected]>> Sent: Wednesday, August 31, 2016 11:52 AM To: [email protected]<mailto:[email protected]> Subject: [WIRELESS-LAN] Odd incident on our 8540 Controllers- wondering if anyone has seen similar? We’re on 8.2.111. From the TAC case notes: We have an 8540 in SSO failover pair config. No changes have been made to the environment in several weeks. With 3,100 APs and 20K clients, we experienced the following condition on multiple secure AND open WLANs that all go to different VLANs: Certain clients- no common type or OS across them- would struggle with select https web page loads while other clients had no problems on same WLANs and same destinations. No problems at all with auth, association, other web sites. And no problems with the target web servers. After hours of troubleshooting, we forced failover to redundant 8540, problem immediately cleared despite all "stateful" failover operations working as they should. Is there a known bug in play here? Just wondering if this occurrence rings any bells for anyone? -Lee Badman ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/groups/.
