Bruce, If you have 2800/3800’s, use the MR5 beta located here. You’ll have to fill out the form. There is a slightly newer build then is documented. https://supportforums.cisco.com/discussion/13205296/82mr5-interim-availability
Official MR5 is getting closer but still a few days out (maybe a week). If you can wait until MR5 releases, that’s likely the best as there are a couple of other fixes planned. The link above has a list of all the fixes. I’ve been running the beta code across five 5508’s and it’s been solid. Jeff From: "[email protected]" <[email protected]> on behalf of "[email protected]" <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Friday, March 10, 2017 at 10:52 AM To: "[email protected]" <[email protected]> Subject: [WIRELESS-LAN] Cisco WLC code recommendations We are currently running version 8.0.133.0 on our Cisco 5508 controllers, as our current access points are primarily 3500s and 3600s. However we have recently purchased a batch of 2802i access points whose minimum supported version is 8.2.110.0. I was looking to the group for their recommendations on a stable version of code which will support our new 2802i access points. Thank you Bruce Entwistle Network Manager University of Redlands ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/discuss. ********** Participation and subscription information for this EDUCAUSE Constituent Group discussion list can be found at http://www.educause.edu/discuss.
