If this is a known reported bug already, then pardon me, otherwise this is a poll to see it anyone else has this issue ...
Anyone using the 2802i AP, and on the "slot 0" XOR interface, if you have it set to (Radio Role Assignment = Auto) ... can you check to see if the controller is setting the 5GHz channel of these APs, to all the same channel ? (Sometimes they are all set to 36, sometimes it's 149.) Our 8540 WLC is at release 8.5.160.0. It's as easy workaround to change the Radio Role Assignment to Manual/(Client Serving) and then decide what band (2.4Ghz/5Ghz) is more appropriate. After doing so, the controller usually makes better channel assignment decisions. In some cases, one may want to make this judgement call (to do a Manual role assignment), based on design factors such as "we already have enough 2.4Ghz radios in this space." However, the use of the Auto Assignment role (letting the controller do the "driving", with FRA - Flexible Radio Assignment), may also be desirable. -- Will Dawes Wireless Network Engineer Louisiana State University ********** Replies to EDUCAUSE Community Group emails are sent to the entire community list. If you want to reply only to the person who sent the message, copy and paste their email address and forward the email reply. Additional participation and subscription information can be found at https://www.educause.edu/community
