We have not used that Oberon model, but I've been an Oberon customer since 2004 
and know how they do business.  They will have accounted for the back box.  If 
you install the AP according to the manufacturer's instructions, the AP's 
antenna elements will be coplanar with or below the bottom of the metal 
enclosure.  Given typical ceiling heights and the down tilt built into the 
integrated antennas of most APs, the enclosure shouldn't affect the usable 
coverage very much.  The metal back box also reduces co-channel interference 
between floors.

One caveat is that I recommend testing if you have wireless client devices 
mounted at or near ceiling height.  I don't have any experience with that, but 
the enclosure might be a factor in that circumstance.  Otherwise, you should be 
safe.

Chuck Enfield
Manager, Wireless & Cellular
Penn State IT
814-863-8715

From: The EDUCAUSE Wireless Issues Community Group Listserv 
<[email protected]> On Behalf Of Smith, Nayef
Sent: Monday, June 14, 2021 9:31 AM
To: [email protected]
Subject: [WIRELESS-LAN] Oberon 1044 Recessed Suspended Ceiling mount experiences

I'm curious if anyone has tested or deployed any access points using the Oberon 
1044 Recessed Suspended Ceiling mounts and noticed any impact to signal?  I've 
been searching for information on signal impact but am not finding much.  The 
recessed box for this mount is metal and designed for plenum installations so 
i'm expecting some impact to signal.

Thanks in advance,
Nayef


Nayef Z. Smith | Network Services | Voice: 404-727-6019


[cid:[email protected]]


________________________________

This e-mail message (including any attachments) is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
prohibited.

If you have received this message in error, please contact
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).

**********
Replies to EDUCAUSE Community Group emails are sent to the entire community 
list. If you want to reply only to the person who sent the message, copy and 
paste their email address and forward the email reply. Additional participation 
and subscription information can be found at 
https://www.educause.edu/community<https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.educause.edu%2Fcommunity&data=04%7C01%7Ccae104%40PSU.EDU%7Cb147ee2e8d024dac388908d92f38a026%7C7cf48d453ddb4389a9c1c115526eb52e%7C0%7C1%7C637592742523262861%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C2000&sdata=DAWwMB4v836EUd6KAW%2BXQNj2yX3QL0ShHthOUb9Or7k%3D&reserved=0>

**********
Replies to EDUCAUSE Community Group emails are sent to the entire community 
list. If you want to reply only to the person who sent the message, copy and 
paste their email address and forward the email reply. Additional participation 
and subscription information can be found at https://www.educause.edu/community

Reply via email to