On Jan 2, 2008 9:43 AM, Nino <[EMAIL PROTECTED]> wrote:
> Si io ho avuto successo, funziona benissimo, ho recuperato in prestito
> una cm9 qui a Catanzaro, se vuoi prova a flashare sulla CF la mia
> immagine con madwifi compilato nel kernel.
> Trovi l'immagine qui:
> http://test.ninux.org/~nino/openwrt/x86/openwrt-x86-ext2.image
> Fammi sapere
> Ciao
> Nino
>
Ho provato la tua immagine, continuo a non vedere le CM9 che
ho messo sulla ALIX.
Nel senso che iwconfig vede solo le interfacce lo eth0 e eth1
ovviamente senza wireless estensions.
Cosa potrebbe mancarmi? Spero che non siano difettose le
CM9 che sono state appena tolte dalla confezione di Tronico!
C'è da dire che non ho pigtails e quindi le CM9 non sono
collegate ad alcuna antenna... ma non credo significhi nulla.
Incollo il dmesg, se può essere utile a individuare il
problema. Molte grazie e pizza pagata a chiunque mi
da una indicazione! :)
[EMAIL PROTECTED]:~# dmesg
Linux version 2.6.23.11 ([EMAIL PROTECTED]) (gcc version 4.1.2) #3 SMP
Sun Dec 30 23:12:36 UTC 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
128MB LOWMEM available.
Entering add_active_range(0, 0, 32768) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 32768
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 32768
On node 0 totalpages: 32768
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 224 pages used for memmap
Normal zone: 28448 pages, LIFO batch:7
Movable zone: 0 pages used for memmap
DMI not present or invalid.
Allocating PCI resources starting at 10000000 (gap: 08000000:f7f00000)
Built 1 zonelists in Zone order. Total pages: 32512
Kernel command line: root=/dev/hda2 rootfstype=ext2 init=/etc/preinit
noinitrd console=tty0 console=ttyS0,38400n8 reboot=bios
No local APIC present or hardware disabled
mapped APIC to ffffb000 (0110a000)
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Detected 431.648 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
console [ttyS0] enabled
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 126900k/131072k available (1521k kernel code, 3680k reserved,
591k data, 184k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB)
vmalloc : 0xc8800000 - 0xfffb7000 ( 887 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
.init : 0xc0317000 - 0xc0345000 ( 184 kB)
.data : 0xc027c51e - 0xc03101fc ( 591 kB)
.text : 0xc0100000 - 0xc027c51e (1521 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 864.48 BogoMIPS (lpj=4322433)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0088a93d c0c0a13d 00000000 00000000
00000000 00000000 00000000 00000000
CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
CPU: L2 Cache: 128K (32 bytes/line)
CPU: After all inits, caps: 0088a93d c0c0a13d 00000000 00000000
00000000 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
CPU0: AMD Geode(TM) Integrated Processor by AMD PCS stepping 02
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfcc2b, last bus=0
PCI: Using configuration type 1
Setting up standard PCI resources
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
NET: Registered protocol family 2
Time: tsc clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 49152 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
microcode: CPU0 not a capable Intel processor
IA-32 Microcode Update Driver: v1.14a <[EMAIL PROTECTED]>
scx200: NatSemi SCx200 Driver
squashfs: version 3.0 (2006/03/15) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) (c) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
AMD Geode RNG detected
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
hda: TRANSCEND, ATA DISK drive
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 3915072 sectors (2004 MB) w/1KiB Cache, CHS=3884/16/63
hda: hda1 hda2
block2mtd: version $Revision: 1.30 $
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP vegas registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <[EMAIL PROTECTED]>
All bugs added by David S. Miller <[EMAIL PROTECTED]>
Using IPI Shortcut mode
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 184k freed
Warning: unable to open an initial console.
natsemi dp8381x driver, version 2.1, Sept 11, 2006
originally by Donald Becker <[EMAIL PROTECTED]>
2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
PPP generic driver version 2.4.2
Registered led device: alix:1
Registered led device: alix:2
Registered led device: alix:3
wlan: 0.8.4.2 (0.9.4)
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112,
RF2413, RF5413, RF2133)
ath_rate_minstrel: Minstrel automatic rate control algorithm 1.2 (0.9.4)
ath_rate_minstrel: look around rate set to 10%
ath_rate_minstrel: EWMA rolloff level set to 75%
ath_rate_minstrel: max segment size in the mrr set to 6000 us
wlan: mac acl policy registered
ath_pci: 0.9.4.5 (0.9.4)
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
PCI: Setting latency timer of device 0000:00:09.0 to 64
eth0: VIA Rhine III (Management Adapter) at 0xe0000000,
00:0d:b9:12:e3:b8, IRQ 10.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1.
PCI: Setting latency timer of device 0000:00:0b.0 to 64
eth1: VIA Rhine III (Management Adapter) at 0xe0040000,
00:0d:b9:12:e3:b9, IRQ 12.
eth1: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth1: link down
[EMAIL PROTECTED]:~#
