27.11.24 22:50, Robert Clausecker:
I have just purchased an ASUS USB-AC53 USB WLAN adapter.
This adapter identifies itself as follows:
ugen0.2: <Realtek 802.11ac NIC> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=ON (500mA)
bLength = 0x0012
bDescriptorType = 0x0001
bcdUSB = 0x0210
bDeviceClass = 0x0000 <Probed by interface class>
bDeviceSubClass = 0x0000
bDeviceProtocol = 0x0000
bMaxPacketSize0 = 0x0040
idVendor = 0x0b05
idProduct = 0x184c
bcdDevice = 0x0210
iManufacturer = 0x0001 <Realtek>
iProduct = 0x0002 <802.11ac NIC>
iSerialNumber = 0x0003 <123456>
bNumConfigurations = 0x0001
There's a match for this driver in /usr/src/sys/contrib/dev/rtw88/rtw8822bu.c:
{ USB_DEVICE_AND_INTERFACE_INFO(0x0b05, 0x184c, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t)&(rtw8822b_hw_spec) }, /* ASUS U2 */
but if I load rtw88, nothing happens.
Is there any step I'm missing to make this adapter work?
Yours,
Robert Clausecker
I have never used this adapter, but do you have
net/wifi-firmware-rtw88-kmod installed?
